githaven/vendor/github.com/couchbase/vellum/fst_iterator.go

//  Copyright (c) 2017 Couchbase, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// 		http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package vellum

import (
	"bytes"
)

// Iterator represents a means of visity key/value pairs in order.
type Iterator interface {

	// Current() returns the key/value pair currently pointed to.
	// The []byte of the key is ONLY guaranteed to be valid until
	// another call to Next/Seek/Close.  If you need it beyond that
	// point you MUST make a copy.
	Current() ([]byte, uint64)

	// Next() advances the iterator to the next key/value pair.
	// If no more key/value pairs exist, ErrIteratorDone is returned.
	Next() error

	// Seek() advances the iterator the specified key, or the next key
	// if it does not exist.
	// If no keys exist after that point, ErrIteratorDone is returned.
	Seek(key []byte) error

	// Reset resets the Iterator' internal state to allow for iterator
	// reuse (e.g. pooling).
	Reset(f *FST, startKeyInclusive, endKeyExclusive []byte, aut Automaton) error

	// Close() frees any resources held by this iterator.
	Close() error
}

// FSTIterator is a structure for iterating key/value pairs in this FST in
// lexicographic order.  Iterators should be constructed with the FSTIterator
// method on the parent FST structure.
type FSTIterator struct {
	f   *FST
	aut Automaton

	startKeyInclusive []byte
	endKeyExclusive   []byte

	statesStack    []fstState
	keysStack      []byte
	keysPosStack   []int
	valsStack      []uint64
	autStatesStack []int

	nextStart []byte
}

func newIterator(f *FST, startKeyInclusive, endKeyExclusive []byte,
	aut Automaton) (*FSTIterator, error) {

	rv := &FSTIterator{}
	err := rv.Reset(f, startKeyInclusive, endKeyExclusive, aut)
	if err != nil {
		return nil, err
	}
	return rv, nil
}

// Reset resets the Iterator' internal state to allow for iterator
// reuse (e.g. pooling).
func (i *FSTIterator) Reset(f *FST,
	startKeyInclusive, endKeyExclusive []byte, aut Automaton) error {
	if aut == nil {
		aut = alwaysMatchAutomaton
	}

	i.f = f
	i.startKeyInclusive = startKeyInclusive
	i.endKeyExclusive = endKeyExclusive
	i.aut = aut

	return i.pointTo(startKeyInclusive)
}

// pointTo attempts to point us to the specified location
func (i *FSTIterator) pointTo(key []byte) error {
	// tried to seek before start
	if bytes.Compare(key, i.startKeyInclusive) < 0 {
		key = i.startKeyInclusive
	}

	// tried to see past end
	if i.endKeyExclusive != nil &&
		bytes.Compare(key, i.endKeyExclusive) > 0 {
		key = i.endKeyExclusive
	}

	// reset any state, pointTo always starts over
	i.statesStack = i.statesStack[:0]
	i.keysStack = i.keysStack[:0]
	i.keysPosStack = i.keysPosStack[:0]
	i.valsStack = i.valsStack[:0]
	i.autStatesStack = i.autStatesStack[:0]

	root, err := i.f.decoder.stateAt(i.f.decoder.getRoot(), nil)
	if err != nil {
		return err
	}

	autStart := i.aut.Start()

	maxQ := -1
	// root is always part of the path
	i.statesStack = append(i.statesStack, root)
	i.autStatesStack = append(i.autStatesStack, autStart)
	for j := 0; j < len(key); j++ {
		keyJ := key[j]
		curr := i.statesStack[len(i.statesStack)-1]
		autCurr := i.autStatesStack[len(i.autStatesStack)-1]

		pos, nextAddr, nextVal := curr.TransitionFor(keyJ)
		if nextAddr == noneAddr {
			// needed transition doesn't exist
			// find last trans before the one we needed
			for q := curr.NumTransitions() - 1; q >= 0; q-- {
				if curr.TransitionAt(q) < keyJ {
					maxQ = q
					break
				}
			}
			break
		}
		autNext := i.aut.Accept(autCurr, keyJ)

		next, err := i.f.decoder.stateAt(nextAddr, nil)
		if err != nil {
			return err
		}

		i.statesStack = append(i.statesStack, next)
		i.keysStack = append(i.keysStack, keyJ)
		i.keysPosStack = append(i.keysPosStack, pos)
		i.valsStack = append(i.valsStack, nextVal)
		i.autStatesStack = append(i.autStatesStack, autNext)
		continue
	}

	if !i.statesStack[len(i.statesStack)-1].Final() ||
		!i.aut.IsMatch(i.autStatesStack[len(i.autStatesStack)-1]) ||
		bytes.Compare(i.keysStack, key) < 0 {
		return i.next(maxQ)
	}

	return nil
}

// Current returns the key and value currently pointed to by the iterator.
// If the iterator is not pointing at a valid value (because Iterator/Next/Seek)
// returned an error previously, it may return nil,0.
func (i *FSTIterator) Current() ([]byte, uint64) {
	curr := i.statesStack[len(i.statesStack)-1]
	if curr.Final() {
		var total uint64
		for _, v := range i.valsStack {
			total += v
		}
		total += curr.FinalOutput()
		return i.keysStack, total
	}
	return nil, 0
}

// Next advances this iterator to the next key/value pair.  If there is none
// or the advancement goes beyond the configured endKeyExclusive, then
// ErrIteratorDone is returned.
func (i *FSTIterator) Next() error {
	return i.next(-1)
}

func (i *FSTIterator) next(lastOffset int) error {
	// remember where we started
	i.nextStart = append(i.nextStart[:0], i.keysStack...)

	nextOffset := lastOffset + 1

OUTER:
	for true {
		curr := i.statesStack[len(i.statesStack)-1]
		autCurr := i.autStatesStack[len(i.autStatesStack)-1]

		if curr.Final() && i.aut.IsMatch(autCurr) &&
			bytes.Compare(i.keysStack, i.nextStart) > 0 {
			// in final state greater than start key
			return nil
		}

		numTrans := curr.NumTransitions()

	INNER:
		for nextOffset < numTrans {
			t := curr.TransitionAt(nextOffset)
			autNext := i.aut.Accept(autCurr, t)
			if !i.aut.CanMatch(autNext) {
				nextOffset += 1
				continue INNER
			}

			pos, nextAddr, v := curr.TransitionFor(t)

			// the next slot in the statesStack might have an
			// fstState instance that we can reuse
			var nextPrealloc fstState
			if len(i.statesStack) < cap(i.statesStack) {
				nextPrealloc = i.statesStack[0:cap(i.statesStack)][len(i.statesStack)]
			}

			// push onto stack
			next, err := i.f.decoder.stateAt(nextAddr, nextPrealloc)
			if err != nil {
				return err
			}

			i.statesStack = append(i.statesStack, next)
			i.keysStack = append(i.keysStack, t)
			i.keysPosStack = append(i.keysPosStack, pos)
			i.valsStack = append(i.valsStack, v)
			i.autStatesStack = append(i.autStatesStack, autNext)

			// check to see if new keystack might have gone too far
			if i.endKeyExclusive != nil &&
				bytes.Compare(i.keysStack, i.endKeyExclusive) >= 0 {
				return ErrIteratorDone
			}

			nextOffset = 0
			continue OUTER
		}

		if len(i.statesStack) <= 1 {
			// stack len is 1 (root), can't go back further, we're done
			break
		}

		// no transitions, and still room to pop
		i.statesStack = i.statesStack[:len(i.statesStack)-1]
		i.keysStack = i.keysStack[:len(i.keysStack)-1]

		nextOffset = i.keysPosStack[len(i.keysPosStack)-1] + 1

		i.keysPosStack = i.keysPosStack[:len(i.keysPosStack)-1]
		i.valsStack = i.valsStack[:len(i.valsStack)-1]
		i.autStatesStack = i.autStatesStack[:len(i.autStatesStack)-1]
	}

	return ErrIteratorDone
}

// Seek advances this iterator to the specified key/value pair.  If this key
// is not in the FST, Current() will return the next largest key.  If this
// seek operation would go past the last key, or outside the configured
// startKeyInclusive/endKeyExclusive then ErrIteratorDone is returned.
func (i *FSTIterator) Seek(key []byte) error {
	return i.pointTo(key)
}

// Close will free any resources held by this iterator.
func (i *FSTIterator) Close() error {
	// at the moment we don't do anything,
	// but wanted this for API completeness
	return nil
}