* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc52140238e16680f2e05e448e9be51372afdf5.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb5667d24d3a3c7843dc28a229efffb1e6.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685eaaf261ebbb7d3420e3376a4ee8e7f2.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc05d1fa8ff7e81dcbc0ccd93fdc9d50.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Add team support for review request
Block #11355
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Restrict TLS connections to 1.2 minimum
* Set Argon2 as the default KDF
* Fix user.yml
* Remove TLS minversion changes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration as per @techknowlogick
Signed-off-by: Andrew Thornton <art27@cantab.net>
* set the password algo in the fixtures
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the v148 migration - it needs recreate table to change the defaults
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Nadim Kobeissi <nadim@symbolic.software>
* Add organization wide labels
Implement organization wide labels similar to organization wide
webhooks. This lets you create individual labels for organizations that can be used
for all repos under that organization (so being able to reuse the same
label across multiple repos).
This makes it possible for small organizations with many repos to use
labels effectively.
Fixes#7406
* Add migration
* remove comments
* fix tests
* Update options/locale/locale_en-US.ini
Removed unused translation string
* show org labels in issue search label filter
* Use more clear var name
* rename migration after merge from master
* comment typo
* update migration again after rebase with master
* check for orgID <=0 per guillep2k review
* fmt
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* remove unused code
* Make sure RepoID is 0 when searching orgID per code review
* more changes/code review requests
* More descriptive translation var per code review
* func description/delete comment when issue label deleted instead of hiding it
* remove comment
* only use issues in that repo when calculating number of open issues for org label on repo label page
* Add integration test for IssuesSearch API with labels
* remove unused function
* Update models/issue_label.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use subquery in GetLabelIDsInReposByNames
* Fix tests to use correct orgID
* fix more tests
* IssuesSearch api now uses new BuildLabelNamesIssueIDsCondition. Add a few more tests as well
* update comment for clarity
* Revert previous code change now that we can use the new BuildLabelNamesIssueIDsCondition
* Don't sort repos by date in IssuesSearch API
After much debugging I've found a strange issue where in some cases MySQL will return a different result than other enigines if a query is sorted by a null collumn. For example with our integration test data where we don't set updated_unix in repository fixtures:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 45
Returns different results for MySQL than other engines. However, the similar query:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 30
Returns the same results.
This causes integration tests to fail on MySQL in certain cases but would never show up in a real installation. Since this API call always returns issues based on the optionally provided repo_priority_id or the issueID itself, there is no change to results by changing the repo sorting method used to get ids earlier in the function.
* linter is back!
* code review
* remove now unused option
* Fix newline at end of files
* more unused code
* update to master
* check for matching ids before query
* Update models/issue_label.go
Co-Authored-By: 6543 <6543@obermui.de>
* Update models/issue_label.go
* update comments
* Update routers/org/setting.go
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
* Add fixture gen tool and fix "access" test
* Close file before exiting
* Add missing repo_unit for repo id: 5
* Fix count on TestAPIOrgRepos
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Restricted users (#4334): initial implementation
* Add User.IsRestricted & UI to edit it
* Pass user object instead of user id to places where IsRestricted flag matters
* Restricted users: maintain access rows for all referenced repos (incl public)
* Take logged in user & IsRestricted flag into account in org/repo listings, searches and accesses
* Add basic repo access tests for restricted users
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Mention restricted users in the faq
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Revert unnecessary change `.isUserPartOfOrg` -> `.IsUserPartOfOrg`
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Remove unnecessary `org.IsOrganization()` call
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Revert to an `int64` keyed `accessMap`
* Add type `userAccess`
* Add convenience func updateUserAccess()
* Turn accessMap into a `map[int64]userAccess`
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* or even better: `map[int64]*userAccess`
* updateUserAccess(): use tighter syntax as suggested by lafriks
* even tighter
* Avoid extra loop
* Don't disclose limited orgs to unauthenticated users
* Don't assume block only applies to orgs
* Use an array of `VisibleType` for filtering
* fix yet another thinko
* Ok - no need for u
* Revert "Ok - no need for u"
This reverts commit 5c3e886aabd5acd997a3b35687d322439732c200.
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* add "before" query to ListIssueComments and ListRepoIssueComments
* Add TEST
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* test: add current attachement responses
* refactor: check if attachement is linked and accessible by user
* chore: clean TODO
* fix: typo attachement -> attachment
* revert un-needed go.sum change
* refactor: move models logic to models
* fix TestCreateIssueAttachment which was wrongly successful
* fix unit tests with unittype added
* fix unit tests with changes
* use a valid uuid format for pgsql int. test
* test: add unit test TestLinkedRepository
* refactor: allow uploader to access unlinked attachement
* add missing blank line
* refactor: move to a separate function repo.GetAttachment
* typo
* test: remove err test return
* refactor: use repo perm for access checking generally + 404 for all reject
* dont insert "-1" in any case to issue.poster_id
* Make sure API cant override importand fields
* code format
* fix lint
* WIP test
* add missing poster_id
* fix test
* user.IsGhost handle nil
* CI.restart()
* make sure no -1 is realy added
* CI.restart()
* @lunny suggestion remove some not allowed fields
* seperate issue.LoadMilestone
* load milestone and return it on IssueEdit via API
* extend Test for TestAPIEditIssue
* fix fixtures
* declare allowedColumnsUpdateIssueByAPI only once
* Update Year
* no var just write id drecty into func cal
Co-authored-by: Lauris BH <lauris@nix.lv>
* reject reactions wich ar not allowed
* dont duble check CreateReaction now throw ErrForbiddenIssueReaction
* add /repos/{owner}/{repo}/issues/comments/{id}/reactions endpoint
* add Find Functions
* fix some swagger stuff + add issue reaction endpoints + GET ReactionList now use FindReactions...
* explicite Issue Only Reaction for FindReactionsOptions with "-1" commentID
* load issue; load user ...
* return error again
* swagger def canged after LINT
* check if user has ben loaded
* add Tests
* better way of comparing results
* add suggestion
* use different issue for test
(dont interfear with integration test)
* test dont compare Location on timeCompare
* TEST: add forbidden dubble add
* add comments in code to explain
* add settings.UI.ReactionsMap
so if !setting.UI.ReactionsMap[opts.Type] works
* Possibility to not use whitelist but allow anyone with write access
* fix existing test
* rename migration function
* Try to give a better name for migration step
* Clear settings if higher level setting is not set
* Move official reviews to db instead of counting approvals each time
* migration
* fix
* fix migration
* fix migration
* Remove NOT NULL from EnableWhitelist as migration isn't possible
* Fix migration, reviews are connected to issues.
* Fix SQL query issues in GetReviewersByPullID.
* Simplify function GetReviewersByIssueID
* Handle reviewers that has been deleted
* Ensure reviews for test is in a well defined order
* Only clear and set official reviews when it is an approve or reject.
* Make repository list @ issues/PR page persist
Will partially fix#6355
* Enable multiple selections in repo list @ issues/PR page
Part of issue #6355
* Add RepoIDs to UserIssueStatsOptions to make "type" count correct when selecting one/multiple repos.
* Replace variable "repo" with list "repos[]" and enable multiple selections of repositories from list by including/excluding RepoIDs in list.
*
* Remove redundant code
* Add 'All' button
Improves functionality of the page, so that backtracking is not necessary to reset the page
* Remove redundant variable
Completely replace 'RepoID' with 'RepoIDs' and remove redundant code
* Add RepoIDs to label link
* Revert part of code to previous version to troubleshoot build failure
* Implement old and new pieces of code whilst adhering to multi select
* Attempt to join the two versions
Last commit passed tests but doesn't work in practice, this works in practice and hopefully passes the tests.
* Update tests to desired state
* Fix pagination implementation and tests
* Pass repoIDs as `repos=[1,2,3...]` instead of several `repos[]=..`
* Update tests file to reflect new functionality
* Update template with new `repos` format
* Implement new solution to show constant "total issues" count for "All" button
* Correct behavior when passing zero to array
* Comment out test url returning 404
This keeps returning 404 in the test despite working in practice, for the sake of running more tests I am commenting it out
* Comment out another test url returning 404
Last attempt, if more tests crash I will uncomment the urls and request assistance.
* Reenable tests and test fix
* Re-enable tests
* Make selecting "In your repositories" reset selection as passing IDs of repos belonging to other profiles causes breakage
* Remove unnecessary (with multi-selection enable) code
* Drop repo from repo map and total count if permission denied
* Remove extra parenthesis
* make template work again
* find bug!
* forgot the '#' at bugfixing
* delete unused RepoID
* compile regex only one time
* make fmt
* local variable = capital letter lower
* check if repos query pattern is correct
* pagination remove last , - make regex work again
* use Replace instead of ReplaceAll; del delete
* fix test
* how did this test binary got in?!?
dont forgot the "-p" at git add * !
* dont replace -> cut fisrt & last string
Co-Authored-By: zeripath <art27@cantab.net>
* jet another regex
dont mind as long as it has the same result and is performatn ...
Co-Authored-By: zeripath <art27@cantab.net>
* dont use nonexisting repo for test
* exclude /issues?type=created_by from test
* add table to querys
use same syntax in each query (table.colum)
* add new issue for test
* dont make a workaround or something else
this need a refactor itself and is out of scope for this PR
* fix misspell
* CI.redo()
* englisch txt update
Co-Authored-By: zeripath <art27@cantab.net>
* add sugestions
* Tweak & Fix
* CI.restart()
* FIX: getIssueWatchers() get only aktive suscriber
* save query to work later with it or not ...
* fix test + add new case
* corect tests + GetIssueWatch
* API issue_subscripton: Put/Delete require tocken
* remove redundant code
* swagger specify return value
* remove unused binding
* remove note
because I'll implement this in a different way and in another PR
* ID should be unique!
* use xorm session
* Revert "use xorm session"
This reverts commit c1de540147199f2f1a8dd0d008f54af3603e2229.
* better test code
* more acurate comments
* use assert.False/True instead of Equal
* use more assert methodes
* Add team permission setting to allow creating repo in organization.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test case for creating repo when have team creation access.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* build error: should omit comparison to bool constant
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add comment on exported functions
* Fix fixture consistency, fix existing unit tests
* Fix boolean comparison in xorm query.
* addCollaborator and changeCollaborationAccessMode separate steps
More clear to use different if-cases.
* Create and commit xorm session
* fix
* Add information of create repo permission in team sidebar
* Add migration step
* Clarify that repository creator will be administrator.
* Fix some things after merge
* Fix language text that use html
* migrations file
* Create repository permission -> Create repositories
* fix merge
* fix review comments
* Add support for AUTO_WATCH_ON_CHANGES and AUTO_WATCH_ON_CLONE
* Update models/repo_watch.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Round up changes suggested by lafriks
* Added changes suggested from automated tests
* Updated deleteUser to take RepoWatchModeDont into account, corrected inverted DefaultWatchOnClone and DefaultWatchOnChanges behaviour, updated and added tests.
* Reinsert import "github.com/Unknwon/com" on http.go
* Add migration for new column `watch`.`mode`
* Remove serv code
* Remove WATCH_ON_CLONE; use hooks, add integrations
* Renamed watch_test.go to repo_watch_test.go
* Correct fmt
* Add missing EOL
* Correct name of test function
* Reword cheat and ini descriptions
* Add update to migration to ensure column value
* Clarify comment
Co-Authored-By: zeripath <art27@cantab.net>
* Simplify if condition
* Add teams to repo on collaboration page.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add option for repository admins to change teams access to repo.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add comment for functions
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Make RepoAdminChangeTeamAccess default false in xorm and make it default checked in template instead.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Make proper language strings and fix error redirection.
* Add unit tests for adding and deleting team from repository.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add database migration
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix redirect
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix locale string mismatch.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Move team access mode text logic to template.
* Move collaborator access mode text logic to template.
* Restrict repository indexing by file extension
* Use REPO_EXTENSIONS_LIST_INCLUDE instead of REPO_EXTENSIONS_LIST_EXCLUDE and have a more flexible extension pattern
* Corrected to pass lint gosimple
* Add wildcard support to REPO_INDEXER_EXTENSIONS
* This reverts commit 72a650c8e42f4abf59d5df7cd5dc27b451494cc6.
* Add wildcard support to REPO_INDEXER_EXTENSIONS (no make vendor)
* Simplify isIndexable() for better clarity
* Add gobwas/glob to vendors
* manually set appengine new release
* Implement better REPO_INDEXER_INCLUDE and REPO_INDEXER_EXCLUDE
* Add unit and integration tests
* Update app.ini.sample and reword config-cheat-sheet
* Add doc page and correct app.ini.sample
* Some polish on the doc
* Simplify code as suggested by @lafriks
* Create API endpoints for repo topics.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Generate swagger
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add documentation to functions
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Grammar fix
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix function comment
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Can't use FindTopics when looking for a single repo topic, as it doesnt use exact match
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add PUT /repos/{owner}/{repo}/topics and remove GET /repos/{owner}/{repo}/topics
* Ignore if topic is sent twice in same request, refactoring.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix topic dropdown with api changes.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Style fix
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Update API documentation
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Better way to handle duplicate topics in slice
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Make response element TopicName an array of strings, instead of using an array of TopicName
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test cases for API Repo Topics.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix format of tests
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix comments
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix unit tests after adding some more topics to the test fixture.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Update models/topic.go
Limit multiple if else if ...
Co-Authored-By: Antoine GIRARD <sapk@users.noreply.github.com>
* Engine as first parameter in function
Co-Authored-By: Antoine GIRARD <sapk@users.noreply.github.com>
* Replace magic numbers with http status code constants.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix variable scope
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Test one read with login and one with token
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add some more tests
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Apply suggestions from code review
Use empty struct for efficiency
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Add test case to check access for user with write access
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Fix access, repo admin required to change topics
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Correct first test to be without token
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Any repo reader should be able to access topics.
* No need for string pointer
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add Backend Logic for Toggling Email Notification
This commit adds the backend logic for
allowing users to enable or disable email
notifications. The implementation ensures
that only issue notification emails get disabled
and important emails are still sent regardless
of the setting.
The UI to toggle this setting has not yet been
implemented.
* Add UI and complete user email notification enable
This commit completes the functionality to allow
users to disable their own email notifications.
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Third Option for Only Email on Mention
Signed-off-by: Gary Kim <gary@garykim.dev>
* Readd NOT NULL to new preference string
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Tests and Rewrite Comment
Signed-off-by: Gary Kim <gary@garykim.dev>
* Allow admin to set default email frequency
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add new config option to docs
Signed-off-by: Gary Kim <gary@garykim.dev>
* Fix a few mistakes
Signed-off-by: Gary Kim <gary@garykim.dev>
* Only update required columns
Signed-off-by: Gary Kim <gary@garykim.dev>
* Simplify an error check
Signed-off-by: Gary Kim <gary@garykim.dev>
* Make email_notification_preference column in DB be VARCHAR(20)
Signed-off-by: Gary Kim <gary@garykim.dev>
* Handle errors
Signed-off-by: Gary Kim <gary@garykim.dev>
* Update models/migrations/v93.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Add description in repository search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Refactor SearchRepositoryByName with a general function SearchRepository
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Allow to specify if description shall be included in API repo search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add new app.ini setting for whether to search within repo description.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Search keyword in description (if setting enabled) on:
- Explore page
- Organization profile page
- User profile page
- Admin repo page
Do not search keyword in description on:
- Any non-keyword search (not relevant)
- Incremental search (uses API)
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Put parameters related to keyword directly after it
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test cases for including (and not including) repository description in search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Rename test function from TestSearchRepositoryByName to TestSearchRepository.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Make setting SEARCH_REPO_DESCRIPTION default to true
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* org/members: display 2FA state
* fix comment typo
* lay down UserList bases
* add basic test for previous methods
* add comment for UserList type
* add valid two-fa account
* test new UserList methods
* optimize MembersIsPublic by side loading info on GetMembers + fix integrations tests
* respect fmt rules
* use map for data
* Optimize GetTwoFaStatus
* rewrite by using existing sub func
* Optimize IsUserOrgOwner
* remove un-used code
* tests: cover empty org + fix import order
* tests: add ErrTeamNotExist path
* tests: fix wrong expected result
Handle case where an orginization is private but a user who is not a
member of the orgninization has been added as a collaborator of a repo
within that org
Fixes#6962
* fix org visibility bug
* fix permission check
* add integration tests
* fix tests
* change test user name for easier maintainance and fix test
* fix test git repo name
* Add API for manipulating Git hooks
Signed-off-by: Segev Finer <segev@codeocean.com>
* Replace code.gitea.io/sdk with PR branch temporarily for CI
* Switch back to code.gitea.io/sdk@master
* Return 403 instead of 404 on no permission to edit hooks in API
* Add tests for Git hooks API
* Update models/repo_list_test.go
Co-Authored-By: segevfiner <segev208@gmail.com>
* Update models/repo_list_test.go
Co-Authored-By: segevfiner <segev208@gmail.com>
* empty line
* Support searching commits with prefix syntax
For now, support auther: committer:
When more than one prefix is supplied is presented, the result is the union.
When different prefixes are supplied, the result is the intersection.
For example,
"author:alice author:bob"
=> the result is all commits authored by Alice OR Bob
"hello committer:alice"
=> the result is all commits committed by Alice AND has the keyword
'hello' in the message.
Note that there should NOT have any space after the colon(:) of the prefix.
For example,
"author:bill" => correct
"author: bill" => wrong
* Remove unneeded logging
* Add missing files of test repository
* Add missing repo_unit entries to test fixtures
* Update test cases
* Add tooltip for commits search button
* Update tooltip text
I have no idea about how to format it with line breaks.
* Make the usage example more real
* Add a test case
* Add new options struct for SearchCommits
* Prefer len(s) > 0 over s != ""
* Add NewSearchCommitsOptions
* Show email if the authenticated user owns the profile page being
requested for.
Also removed `setting.UI.ShowUserEmail` as it's documentation says it
only controls the email setting on the explore page
* fix current user check... This prevents a panic as a user must be signed in before ctx.User is called
* fix panic in tests
* try to fix tests
* Update year
* Test CI fail
* Revert change
* User 3 is not allowed to authorize
* Set user2 email to be private
* Change to user4 in explore page as user2 now has private email option set
* fixes#5957
* add tests to make sure config option is respected
* use already defined struct
* - use migration to make the flag repo wide not for the entire gitea instance
Also note that the config value can still be set so as to be able to control the value for new repositories that are to be created
- fix copy/paste error in copyright header year and rearrange import
- use repo config instead of server config value to determine if a commit should close an issue
- update testsuite
* use global config only when creating a new repository
* allow repo admin toggle feature via UI
* fix typo and improve testcase
* fix fixtures
* add DEFAULT prefix to config value
* fix test
* Ensure valid git author names passed in signatures
Fix#5772 - Git author names are not allowed to include `\n` `<` or `>` and
must not be empty. Ensure that the name passed in a signature is valid.
* Account for pathologically named external users
LDAP and the like usernames are not checked in the same way that users who signup are.
Therefore just ensure that user names are also git safe and if totally pathological -
Set them to "user-$UID"
* Add Tests and adjust test users
Make our testcases a little more pathological so that we be sure that integration
tests have a chance to spot these cases.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Added basic heatmap data
* Added extra case for sqlite
* Built basic heatmap into user profile
* Get contribution data from api & styling
* Fixed lint & added extra group by statements for all database types
* generated swagger spec
* generated swagger spec
* generated swagger spec
* fixed swagger spec
* fmt
* Added tests
* Added setting to enable/disable user heatmap
* Added locale for loading text
* Removed UseTiDB
* Updated librejs & moment.js
* Fixed import order
* Fixed heatmap in postgresql
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-Authored-By: kolaente <konrad@kola-entertainments.de>
* Added copyright header
* Fixed a bug to show the heatmap for the actual user instead of the currently logged in
* Added integration test for heatmaps
* Added a heatmap on the dashboard
* Fixed timestamp parsing
* Hide heatmap on mobile
* optimized postgresql group by query
* Improved sqlite group by statement
* Hide outdated comments in file view
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit test by adding "invalidated" comment to fixtures
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Initial ui components for pull request review
* Add Review
Add IssueComment types
Signed-off-by: Jonas Franz <info@jonasfranz.software>
(cherry picked from commit 2b4daab)
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Replace ReviewComment with Content
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add load functions
Add ReviewID to findComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add create review comment implementation
Add migration for review
Other small changes
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Simplified create and find functions for review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved "Pending" to first position
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add GetCurrentReview to simplify fetching current review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Preview for listing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move new comment form to its own file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Implement Review form
Show Review comments on comment stream
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for single comments
Showing buttons in context
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add pending tag to pending review comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for Review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fetch all review ids at once
Add unit tests
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improved comment rendering in "Files" view by adding Comments to DiffLine
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for invalidating comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Switched back to code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved review migration from v64 to v65
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Rebuild css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improve translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix unit tests by updating fixtures and updating outdated test
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Comments will be shown at the right place now
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for deleting CodeComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by files in subdirectories
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for showing code comments of reviews in conversation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for "Show/Hide outdated"
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for new webhooks
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Resolve conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor UI improvements
* update code.gitea.io/git
* Fix ui bug reported by @lunny causing wrong position of add button
Add functionality to "Cancel" button
Add scale effects to add button
Hide "Cancel" button for existing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Prepare solving conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show add button only if no comments already exist for the line
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add missing vendor files
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Check if reviewer is nil
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show forms only to users who are logged in
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Revert "Show forms only to users who are logged in"
This reverts commit c083682
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Save patch in comment
Render patch for code comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add link to comment in code
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add reply form to comment list
Show forms only to signed in users
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add 'Reply' as translatable
Add CODE_COMMENT_LINES setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems introduced by checking for singed in user
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add v70
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update generated stylesheet
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix preview
Beginn with new review comment patch system
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add new algo to generate diff for line range
Remove old algo used for cutting big diffs (it was very buggy)
* Add documentation and example for CutDiffAroundLine
* Fix example of CutDiffAroundLine
* Fix some comment UI rendering bugs
* Add code comment edit mode
* Send notifications / actions to users until review gets published
Fix diff generation bug
Fix wrong hashtag
* Fix vet errors
* Send notifications also for single comments
* Fix some notification bugs, fix link
* Fix: add comment icon is only shown on code lines
* Add lint comment
* Add unit tests for git diff
* Add more error messages
* Regenerated css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* fmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Regenerated CSS with latest less version
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix test by updating comment type to new ID
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Introducing CodeComments as type for map[string]map[int64][]*Comment
Other minor code improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix data-tab issues
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove unnecessary change
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* refactored checkForInvalidation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Append comments instead of setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Use HeadRepo instead of BaseRepo
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update migration
Signed-off-by: Jonas Franz <info@jonasfranz.de>
* Regenerated CSS
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add copyright
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update index.css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for U2F
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add vendor library
Add missing translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F support for Firefox, Chrome (Android) by introducing a custom JS library
Add U2F error handling
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F login page to OAuth
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move U2F user settings to a separate file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for u2f model
Renamed u2f table name
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by refactoring
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F documentation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove not needed console.log-s
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add default values to app.ini.sample
Add FIDO U2F to comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add LDAP service for tests
* Add LDAP login source and test user sign-in
* Add checks to test if user data is correct
* Add LDAP user sync test
* Add failed user sign-in test
* add topic models and unit tests
* fix comments
* fix comment
* add the UI to show or add topics for a repo
* show topics on repositories list
* fix test
* don't show manage topics link when no permission
* use green basic as topic label
* fix topic label color
* remove trace content
* remove debug function
* Pull request options migration and UI in settings
* Add ignore whitespace functionality
* Fix settings if pull requests are disabled
* Fix migration transaction
* Merge with Rebase functionality
* UI changes and related functionality for pull request merging button
* Implement squash functionality
* Fix rebase merging
* Fix pull request merge tests
* Add squash and rebase tests
* Fix API method to reuse default message functions
* Some refactoring and small fixes
* Remove more hardcoded values from tests
* Remove unneeded check from API method
* Fix variable name and comment typo
* Fix reset commit count after PR merge
* Add repo type option to /api/repo/search
* Add tests and fix result of collaborative filter in specific condition
* Fix/optimize search & tests
* Improve integration tests
* Fix lint errors
* Fix unit tests
* Change and improve internal implementation of repo search
* Use NonexistentID
* Make search api more general
* Change mirror and fork search behaviour
* Fix tests & typo in comment
* hide unactive on explore users and some refactors
* fix test for removed Organizations
* fix test for removed Organizations
* fix imports
* fix logic bug
* refactor the toConds
* Rename TestOrganizations to TestSearchUsers and add tests for users
* fix other tests
* fix other tests
* fix watchers tests
* fix comments and remove unused code
* Filter inactive users before sending emails or creating browser notifications
Signed-off-by: David Schneiderbauer <dschneiderbauer@gmail.com>
* fix formatting issues
Signed-off-by: David Schneiderbauer <dschneiderbauer@gmail.com>
* included requested changes
Signed-off-by: David Schneiderbauer <dschneiderbauer@gmail.com>
* optimized database queries
* rebasing new master and add tablenames for clarification in xorm queries
* remove escaped quotationmarks using backticks
Signed-off-by: David Schneiderbauer <dschneiderbauer@gmail.com>
* Added comment's hashtag to url for mail notifications.
* Added explanation to return statement + documentation.
* Replacing in-line link generation with HTMLURL. (+gofmt)
* Replaced action-based model with nil-based model. (+gofmt)
* Replaced mailIssueActionToParticipants with mailIssueCommentToParticipants.
* Updating comment for mailIssueCommentToParticipants
* Added link to comment in "Dashboard"
* Deleting feed entry if a comment is going to be deleted
* Added migration
* Added improved migration to add a CommentID column to action.
* Added improved links to comments in feed entries.
* Fixes#1956 by filtering for deleted comments that are referenced in actions.
* Introducing "IsDeleted" column to action.
* Adding design draft (not functional)
* Adding database models for stopwatches and trackedtimes
* See go-gitea/gitea#967
* Adding design draft (not functional)
* Adding translations and improving design
* Implementing stopwatch (for timetracking)
* Make UI functional
* Add hints in timeline for time tracking events
* Implementing timetracking feature
* Adding "Add time manual" option
* Improved stopwatch
* Created report of total spent time by user
* Only showing total time spent if theire is something to show.
* Adding license headers.
* Improved error handling for "Add Time Manual"
* Adding @sapks 's changes, refactoring
* Adding API for feature tracking
* Adding unit test
* Adding DISABLE/ENABLE option to Repository settings page
* Improving translations
* Applying @sapk 's changes
* Removing repo_unit and using IssuesSetting for disabling/enabling timetracker
* Adding DEFAULT_ENABLE_TIMETRACKER to config, installation and admin menu
* Improving documentation
* Fixing vendor/ folder
* Changing timtracking routes by adding subgroups /times and /times/stopwatch (Proposed by @lafriks )
* Restricting write access to timetracking based on the repo settings (Proposed by @lafriks )
* Fixed minor permissions bug.
* Adding CanUseTimetracker and IsTimetrackerEnabled in ctx.Repo
* Allow assignees and authors to track there time too.
* Fixed some build-time-errors + logical errors.
* Removing unused Get...ByID functions
* Moving IsTimetrackerEnabled from context.Repository to models.Repository
* Adding a seperate file for issue related repo functions
* Adding license headers
* Fixed GetUserByParams return 404
* Moving /users/:username/times to /repos/:username/:reponame/times/:username for security reasons
* Adding /repos/:username/times to get all tracked times of the repo
* Updating sdk-dependency
* Updating swagger.v1.json
* Adding warning if user has already a running stopwatch (auto-timetracker)
* Replacing GetTrackedTimesBy... with GetTrackedTimes(options FindTrackedTimesOptions)
* Changing code.gitea.io/sdk back to code.gitea.io/sdk
* Correcting spelling mistake
* Updating vendor.json
* Changing GET stopwatch/toggle to POST stopwatch/toggle
* Changing GET stopwatch/cancel to POST stopwatch/cancel
* Added migration for stopwatches/timetracking
* Fixed some access bugs for read-only users
* Added default allow only contributors to track time value to config
* Fixed migration by chaging x.Iterate to x.Find
* Resorted imports
* Moved Add Time Manually form to repo_form.go
* Removed "Seconds" field from Add Time Manually
* Resorted imports
* Improved permission checking
* Fixed some bugs
* Added integration test
* gofmt
* Adding integration test by @lafriks
* Added created_unix to comment fixtures
* Using last event instead of a fixed event
* Adding another integration test by @lafriks
* Fixing bug Timetracker enabled causing error 500 at sidebar.tpl
* Fixed a refactoring bug that resulted in hiding "HasUserStopwatch" warning.
* Returning TrackedTime instead of AddTimeOption at AddTime.
* Updating SDK from go-gitea/go-sdk#69
* Resetting Go-SDK back to default repository
* Fixing test-vendor by changing ini back to original repository
* Adding "tags" to swagger spec
* govendor sync
* Removed duplicate
* Formatting templates
* Adding IsTimetrackingEnabled checks to API
* Improving translations / english texts
* Improving documentation
* Updating swagger spec
* Fixing integration test caused be translation-changes
* Removed encoding issues in local_en-US.ini.
* "Added" copyright line
* Moved unit.IssuesConfig().EnableTimetracker into a != nil check
* Removed some other encoding issues in local_en-US.ini
* Improved javascript by checking if data-context exists
* Replaced manual comment creation with CreateComment
* Removed unnecessary code
* Improved error checking
* Small cosmetic changes
* Replaced int>string>duration parsing with int>duration parsing
* Fixed encoding issues
* Removed unused imports
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove unit types commits and settings
* Can not limit units in administrator teams
* Limit changing units only to teams with read and write access mode
* Small code optimization
* add units to team
* fix lint
* finish team setting backend
* finished permission controll on routes
* fix import blank line
* add unit check on ssh/http pull and push and fix test failed
* fix fixtures data
* remove unused code
* Do not allow commiting to protected branch from online editor
* Add editor integration tests for adding new file and not allowing to add new file to protected branch
* Send notifications to partecipants in issue comments
Closes#1216
Includes test (still failing)
* Do not include "labelers" to participants
Fix test to expect what GetParticipants return
* move all push update to git hook post-receive and protected branch check to git hook pre-receive
* add SSH_ORIGINAL_COMMAND check back
* remove all unused codes
* fix the import
* Fix public activity showing private repos (#811)
Signed-off-by: Morgan Bazalgette <the@howl.moe>
* error check after setting is_private to true
* Add test for UpdateRepository w/ visibility change
