* make sure headGitRepo is closed on err too
* refactor
* Fix git.Blob.DataAsync(): exec cancel since we already read all bytes (close pipe since we return a NopCloser)
* Fix dump and restore
* return different error message for get commit
* Fix missing delete release attachment when deleting repository
* Fix ci and add some comments
Co-authored-by: zeripath <art27@cantab.net>
* Timeout on flush in testing
At the end of each test the queues are flushed. At present there is no limit on the
length of time a flush can take which can lead to long flushes.
However, if the CI task is cancelled we lose the log information as to where the long
flush was taking place.
This PR simply adds a default time limit of 2 minutes - at which point an error will
be produced. This should allow us to more easily find the culprit.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* return better error
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Gitea has relied on some slow JS code to match up added and deleted lines on the
diff pages. This can cause a considerable slow down on large diff pages.
This PR makes a small change meaning that the matching up can occur much more simply.
Partial fix#1351
Signed-off-by: Andrew Thornton <art27@cantab.net>
* In Render tolerate not being passed a context
It is possible for RenderString to be passed to an external renderer if markdown
is set to be rendered by an external renderer. No context is currently sent to these
meaning that this will error out.
Fix#16835
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Context to Repo calls for RenderString
All calls from routers can easily add the context - so add it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Refactor the fork service slightly to take ForkRepoOptions
This reduces the number of places we need to change if we want to add other
options during fork time.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* Fix integrations and tests after ForkRepository refactor
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* Update OldRepo -> BaseRepo
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* gofmt pass
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* Report the correct number of pushes on the feeds
Since the number of commits in the Action table has been limited to 5
the number of commits reported on the feeds page is now incorrectly also
limited to 5. The correct number is available as the Len and this PR
changes this to report this.
Fix#16804
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update templates/user/dashboard/feeds.tmpl
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add proxy settings and support for migration and webhook
* Fix default value
* Add newline for example ini
* Add lfs proxy support
* Fix lint
* Follow @zeripath's review
* Fix git clone
* Fix test
* missgin http requests for proxy
* use empty
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
One of the issues holding back performance of the API is the problem of hashing.
Whilst banning BASIC authentication with passwords will help, the API Token scheme
still requires a PBKDF2 hash - which means that heavy API use (using Tokens) can
still cause enormous numbers of hash computations.
A slight solution to this whilst we consider moving to using JWT based tokens and/or
a session orientated solution is to simply cache the successful tokens. This has some
security issues but this should be balanced by the security issues of load from
hashing.
Related #14668
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Ensure empty lines are copiable and final new line too
When files are highlighted the newline character needs to be added in a whitespace
compliant mode. Also ensure the final empty newline is rendered.
Fix#16434
* Add test and ensure spans closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
The fuzzer found an issue with the issue pattern processor where there is a spurious
path.Clean which does not need to be there. This PR also sets the default AppURL for
the fuzzer too.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add info about list endpoints to CONTRIBUTING.md
* Let all list endpoints return X-Total-Count header
* Add TODOs for GetCombinedCommitStatusByRef
* Fix models/issue_stopwatch.go
* Rrefactor models.ListDeployKeys
* Introduce helper func and use them for SetLinkHeader related func
Followup from #16562 prepare for #16567
* Rename ctx.Form() to ctx.FormString()
* Reimplement FormX func to need less code and cpu cycles
* Move code into own file
* Allow setting X-FRAME-OPTIONS
This PR provides a mechanism to set the X-FRAME-OPTIONS header.
Fix#7951
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Pass down SignedUserName down to AccessLogger context
Unfortunately when the AccessLogger was moved back before the contexters the
SignedUserName reporting was lost. This is due to Request.WithContext leading to a
shallow copy of the Request and the modules/context/Context being within that request.
This PR adds a new context variable of a string pointer which is set and handled
in the contexters.
Fix#16600
Signed-off-by: Andrew Thornton <art27@cantab.net>
* handle nil ptr issue
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The CompareAndPullRequestPost handler for POST to /compare
incorrectly handles returning errors to the user. For a start
it does not set the necessary markers to switch SimpleMDE
but it also does not immediately return to the form.
This PR fixes this by setting the appropriate values, fixing
the templates and preventing the suggestion of a too long
title.
Fix#16507
Signed-off-by: Andrew Thornton <art27@cantab.net>
`models` does far too much. In particular it handles all `UserSignin`.
It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in.
Therefore we should move this code out of `models`.
This code has to depend on `models` - therefore it belongs in `services`.
There is a package in `services` called `auth` and clearly this functionality belongs in there.
Plan:
- [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication.
- [x] Move `models.UserSignIn` into `auth`
- [x] Move `models.ExternalUserLogin`
- [x] Move most of the `LoginVia*` methods to `auth` or subpackages
- [x] Move Resynchronize functionality to `auth`
- Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files.
- [x] Move the rest of the LDAP functionality in to the ldap subpackage
- [x] Re-factor the login sources to express an interfaces `auth.Source`?
- I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future
- [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable
- [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2
- [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models.
- [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2
- [x] More simplifications of login_source.go may need to be done
- Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178
- More refactors...?
- OpenID should probably become an auth Method but I think that can be left for another PR
- Methods should also probably be cleaned up - again another PR I think.
- SSPI still needs more refactors.* Rename auth.Auth auth.Method
* Restructure ssh_key.go
- move functions from models/user.go that relate to ssh_key to ssh_key
- split ssh_key.go to try create clearer function domains for allow for
future refactors here.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make Mermaid.js limit configurable
Add `MERMAID_MAX_SOURCE_CHARACTERS` to `[markup]` settings
to make the maximum size of a mermaid render configurable.
Fix#16513
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup! Make Mermaid.js limit configurable
* Update custom/conf/app.example.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* Update locale_cs-CZ.ini
fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix wechat
* fix wechat
* fix wechat
* fix wechat
* Fix invalid params and typo of email templates (#16394)
Signed-off-by: Meano <meanocat@gmail.com>
* Add LRU mem cache implementation (#16226)
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Replace `plugins/docker` with `techknowlogick/drone-docker`in ci (#16407)
* plugins/docker -> techknowlogick/drone-docker
* It is multi-arch
* docs: rewrite email setup (#16404)
* Add intro for both the docs page and mailer methods
* Fix numbering level in SMTP section
* Recommends implicit TLS
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
* Validate Issue Index before querying DB (#16406)
* Fix external renderer (#16401)
* fix external renderer
* use GBackground context as fallback
* no fallback, return error
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add checkbox to delete pull branch after successful merge (#16049)
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Detect encoding changes while parsing diff (#16330)
* Detect encoding changes while parsing diff
* Let branch/tag name be a valid ref to get CI status (#16400)
* fix #16384#
* refactor: move shared helper func to utils package
* extend Tests
* use ctx.Repo.GitRepo if not nil
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix build
* fix build
* Apply suggestions from code review
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: myheavily <myheavily>
Co-authored-by: zhaoxin <gitea@fake.local>
Co-authored-by: Meano <Meano@foxmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Jimmy Praet <jimmy.praet@telenet.be>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Somewhere along the line the creation of git-daemon-export-ok
files disappeared but the updating of these files when
repo visibility changes remained. The problem is that the
current state will create files even when the org or user
is private.
This PR restores creation correctly.
Fix#15521
Signed-off-by: Andrew Thornton <art27@cantab.net>
Unfortunately the chi changes have resulted in the CORS headers for the
git smart http protocol going missing.
This is mostly because the OPTIONS method is not being handled by
httpBase anymore.
This PR adds a GetOptions, PostOptions and Options methods to web
handler to allow OPTIONS method requests to still reach the httpBase
function.
Fix#16350Close#16491
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
A race has been detected in #1441 relating to getting log levels.
This PR protects the GetLevel and GetStacktraceLevel calls with a RW mutex.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent race in TestPersistableChannelQueue
A slight race has become apparent in the TestPersistableChannelQueue.
This PR simply adds locking to prevent the race.
* make print value of "$(GOTESTFLAGS)" on test-backend and unit-test-coverage
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
