Issue filters are being used on repo list page and on milestone issues
page, and the code is mostly duplicated.
This PR does the following changes:
- move issue filters into a shared template
- allow filtering milestone issues by project, so no need to hide this
filter on milestone issues page
- remove some dead code (e. g. issue actions in milestone issues
template)
- fix label filter dropdown width
---------
Co-authored-by: 6543 <6543@obermui.de>
Before:
After:
This issue comes from the change in #25468.
`LoadProject` will always return at least one record, so we use
`ProjectID` to check whether an issue is linked to a project in the old
code.
As other `issue.LoadXXX` functions, we need to check the return value
from `xorm.Session.Get`.
In recent unit tests, we only test `issueList.LoadAttributes()` but
don't test `issue.LoadAttributes()`. So I added a new test for
`issue.LoadAttributes()` in this PR.
---------
Co-authored-by: Denys Konovalov <privat@denyskon.de>
Fix#25627
1. `ctx.Data["Link"]` should use relative URL but not AppURL
2. The `data-params` is incorrect because it doesn't contain "page". JS
can simply use "window.location.search" to construct the AJAX URL
3. The `data-xxx` and `id` in notification_subscriptions.tmpl were
copied&pasted, they don't have affect.
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
A couple of notes:
* Future changes should refactor arguments into a struct
* This filtering only is supported by meilisearch right now
* Issue index number is bumped which will cause a re-index
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
Replace #25446, fix#25438
All "cancel" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
This is a complete fix for all modal dialogs.
The major change is "modules/aria/modal.js", "devtest" related code is
for demo/test purpose.
There are too many files under `routers/web/repo` and the file
`routers/web/repo/setting.go` is too big.
This PR move all setting related routers' body functions under
`routers/web/repo/setting` and also split `routers/web/repo/setting.go`
Related #25559
Current behaviour:
1. Deletion of a package version
2. Redirect to the owners package list
New behaviour:
1. Deletion of a package version
2.1. If there are more versions available, redirect to the package again
2.2. If there are no versions available, redirect to the owners package
list
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
releated to #21820
- Split `Size` in repository table as two new colunms, one is `GitSize`
for git size, the other is `LFSSize` for lfs data. still store full size
in `Size` colunm.
- Show full size on ui, but show each of them by a `title`; example:
- Return full size in api response.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: DmitryFrolovTri <23313323+DmitryFrolovTri@users.noreply.github.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Close#20976Close#20975
1. Fix the bug: the TOC in footer was incorrectly rendered as main
content's TOC
2. Fix the layout: on mobile, the TOC is put above the main content,
while the sidebar is put below the main content
3. Auto collapse the TOC on mobile
ps: many styles of "wiki.css" are moved from old css files, so leave
nits to following PRs.
Refactor `modules/indexer` to make it more maintainable. And it can be
easier to support more features. I'm trying to solve some of issue
searching, this is a precursor to making functional changes.
Current supported engines and the index versions:
| engines | issues | code |
| - | - | - |
| db | Just a wrapper for database queries, doesn't need version | - |
| bleve | The version of index is **2** | The version of index is **6**
|
| elasticsearch | The old index has no version, will be treated as
version **0** in this PR | The version of index is **1** |
| meilisearch | The old index has no version, will be treated as version
**0** in this PR | - |
## Changes
### Split
Splited it into mutiple packages
```text
indexer
├── internal
│ ├── bleve
│ ├── db
│ ├── elasticsearch
│ └── meilisearch
├── code
│ ├── bleve
│ ├── elasticsearch
│ └── internal
└── issues
├── bleve
├── db
├── elasticsearch
├── internal
└── meilisearch
```
- `indexer/interanal`: Internal shared package for indexer.
- `indexer/interanal/[engine]`: Internal shared package for each engine
(bleve/db/elasticsearch/meilisearch).
- `indexer/code`: Implementations for code indexer.
- `indexer/code/internal`: Internal shared package for code indexer.
- `indexer/code/[engine]`: Implementation via each engine for code
indexer.
- `indexer/issues`: Implementations for issues indexer.
### Deduplication
- Combine `Init/Ping/Close` for code indexer and issues indexer.
- ~Combine `issues.indexerHolder` and `code.wrappedIndexer` to
`internal.IndexHolder`.~ Remove it, use dummy indexer instead when the
indexer is not ready.
- Duplicate two copies of creating ES clients.
- Duplicate two copies of `indexerID()`.
### Enhancement
- [x] Support index version for elasticsearch issues indexer, the old
index without version will be treated as version 0.
- [x] Fix spell of `elastic_search/ElasticSearch`, it should be
`Elasticsearch`.
- [x] Improve versioning of ES index. We don't need `Aliases`:
- Gitea does't need aliases for "Zero Downtime" because it never delete
old indexes.
- The old code of issues indexer uses the orignal name to create issue
index, so it's tricky to convert it to an alias.
- [x] Support index version for meilisearch issues indexer, the old
index without version will be treated as version 0.
- [x] Do "ping" only when `Ping` has been called, don't ping
periodically and cache the status.
- [x] Support the context parameter whenever possible.
- [x] Fix outdated example config.
- [x] Give up the requeue logic of issues indexer: When indexing fails,
call Ping to check if it was caused by the engine being unavailable, and
only requeue the task if the engine is unavailable.
- It is fragile and tricky, could cause data losing (It did happen when
I was doing some tests for this PR). And it works for ES only.
- Just always requeue the failed task, if it caused by bad data, it's a
bug of Gitea which should be fixed.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close#24818Close#24222Close#21606Close#21498Close#25107Close#24981
Maybe close#24503
Replace #23301
Replace #22754
And maybe more
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
close#24540
related:
- Protocol: https://gitea.com/gitea/actions-proto-def/pulls/9
- Runner side: https://gitea.com/gitea/act_runner/pulls/201
changes:
- Add column of `labels` to table `action_runner`, and combine the value
of `agent_labels` and `custom_labels` column to `labels` column.
- Store `labels` when registering `act_runner`.
- Update `labels` when `act_runner` starting and calling `Declare`.
- Users cannot modify the `custom labels` in edit page any more.
other changes:
- Store `version` when registering `act_runner`.
- If runner is latest version, parse version from `Declare`. But older
version runner still parse version from request header.
