The current `admin auth` CLI for managing authentication source of type
LDAP via BindDN and Simple LDAP does not allow enabling the respective
source, once disabled via `--not-active`.
The same applies to `--synchronize-users` specifially for LDAP via
BindDN.
These changes add two new flags to LDAP related CLI commands:
- `--active` for both LDAP authentication source types
- `--disable-synchronize-users` for LDAP via BindDN
Signed-off-by: justusbunsi <61625851+justusbunsi@users.noreply.github.com>
This PR adds a new manager command to switch on SQL logging and to turn it off.
```
gitea manager logging log-sql
gitea manager logging log-sql --off
```
Signed-off-by: Andrew Thornton <art27@cantab.net>
fgprof is a sampling Go profiler that allows you to analyze On-CPU as
well as Off-CPU (e.g. I/O) time together.
Go's builtin sampling CPU profiler can only show On-CPU time, but it's
better than fgprof at that. Go also includes tracing profilers that can
analyze I/O, but they can't be combined with the CPU profiler.
fgprof is designed for analyzing applications with mixed I/O and CPU
workloads. This kind of profiling is also known as wall-clock profiling.
Whilst fgprof can cause significant STW latencies in applications with a
lot of goroutines (> 1-10k), these latencies only occur if the profile
is requested - it doesn't cause a delay by simply being available.
The fgprof profile is mounted on
`http://localhost:6060/debug/fgprof?seconds=3`
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean git support for ver < 2.0
* fine tune tests for markup (which requires git module)
* remove unnecessary comments
* try to fix tests
* try test again
* use const for GitVersionRequired instead of var
* try to fix integration test
* Refactor CheckAttributeReader to make a *git.Repository version
* update document for commit signing with Gitea's internal gitconfig
* update document for commit signing with Gitea's internal gitconfig
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- We don't need to buffer the logger with a thousand capacity. It's not
a high-throughput logger, this also caused issue whereby the logger
can't keep up with repeated messages being send(somehow they are lost in
the queue?).
- Resolves#19969
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix cli command restore-repo: "units" should be parsed as StringSlice because after #15790 it's read by c.StringSlice("units"). Before, the "units" were processed by strings.Split
* Add checking for invalid unit names
Co-authored-by: 6543 <6543@obermui.de>
* Move access and repo permission to models/perm/access
* fix test
* Move some git related files into sub package models/git
* Fix build
* fix git test
* move lfs to sub package
* move more git related functions to models/git
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
* Move some repository related code into sub package
* Move more repository functions out of models
* Fix lint
* Some performance optimization for webhooks and others
* some refactors
* Fix lint
* Fix
* Update modules/repository/delete.go
Co-authored-by: delvh <dev.lh@web.de>
* Fix test
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
Co-authored-by: delvh <dev.lh@web.de>
When Gitea is running as PID 1 git will occassionally orphan child processes leading
to (defunct) processes. This PR simply sets Setpgid to true on these child processes
meaning that these defunct processes will also be correctly reaped.
Fix#19077
Signed-off-by: Andrew Thornton <art27@cantab.net>
* docs: update the ROOT documentation and error messages
* The documentation now reflects what happens in the
setting/repository.go::newRepository function:
filepath.Join(AppWorkPath, RepoRootPath) was missing.
* The error message displayed when RepoRootPath is not found now
displays the value of RepoRootPath. Given the complexity of the
construction of this value, only referring to it in the abstract
is likely to be misleading to the Gitea admin trying to interpret
the message.
Co-authored-by: delvh <dev.lh@web.de>
* Apply DefaultUserIsRestricted in CreateUser
* Enforce system defaults in CreateUser
Allow for overwrites with CreateUserOverwriteOptions
* Fix compilation errors
* Add "restricted" option to create user command
* Add "restricted" option to create user admin api
* Respect default setting.Service.RegisterEmailConfirm and setting.Service.RegisterManualConfirm where needed
* Revert "Respect default setting.Service.RegisterEmailConfirm and setting.Service.RegisterManualConfirm where needed"
This reverts commit ee95d3e8dc9e9fff4fa66a5111e4d3930280e033.
* When dumping trim the standard suffices instead of a random suffix
Instead of using the `path.Ext()` to trim the last "extension" suffix, just iterate
through the supported suffices and trim those.
Fix#19424
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix enum with to have correct supported types only
Co-authored-by: 6543 <6543@obermui.de>
* Warn on SSH connection for incorrect configuration
- When `setting.RepoRootPath` cannot be found(most likely due to
incorrect configuration) show "Gitea: Incorrect configuration" on the
client-side to help easier with debugging the problem.
* Update cmd/serv.go
Co-authored-by: delvh <dev.lh@web.de>
* Don't leak configuration
* Update cmd/serv.go
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Follows: #19284
* The `CopyDir` is only used inside test code
* Rewrite `ToSnakeCase` with more test cases
* The `RedisCacher` only put strings into cache, here we use internal `toStr` to replace the legacy `ToStr`
* The `UniqueQueue` can use string as ID directly, no need to call `ToStr`
Follows #19266, #8553, Close#18553, now there are only three `Run..(&RunOpts{})` functions.
* before: `stdout, err := RunInDir(path)`
* now: `stdout, _, err := RunStdString(&git.RunOpts{Dir:path})`
Continues on from #19202.
Following the addition of pprof labels we can now more easily understand the relationship between a goroutine and the requests that spawn them.
This PR takes advantage of the labels and adds a few others, then provides a mechanism for the monitoring page to query the pprof goroutine profile.
The binary profile that results from this profile is immediately piped in to the google library for parsing this and then stack traces are formed for the goroutines.
If the goroutine is within a context or has been created from a goroutine within a process context it will acquire the process description labels for that process.
The goroutines are mapped with there associate pids and any that do not have an associated pid are placed in a group at the bottom as unbound.
In this way we should be able to more easily examine goroutines that have been stuck.
A manager command `gitea manager processes` is also provided that can export the processes (with or without stacktraces) to the command line.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove `db.DefaultContext` usage in routers, use `ctx` directly
* Use `ctx` directly if there is one, remove some `db.DefaultContext` in `services`
* Use ctx instead of db.DefaultContext for `cmd` and some `modules` packages
* fix incorrect context usage
* Add setting for a JSON that maps LDAP groups to Org Teams.
* Add log when removing or adding team members.
* Sync is being run on login and periodically.
* Existing group filter settings are reused.
* Adding and removing team members.
* Sync not existing LDAP group.
* Login with broken group map JSON.
* Refactor jwt.StandardClaims to RegisteredClaims
go-jwt/jwt has deprecated the StandardClaims interface to use RegisteredClaims
instead. This PR migrates to use this new format.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Make router logger more friendly, show the related function name/file/line.
[BREAKING]
This PR substantially changes the logging format of the router logger. If you use this logging for monitoring e.g. fail2ban you will need to update this to match the new format.
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
if return a error message to cli, it will print it
to stderr which is duplicate with our code (line 82
in same file). so user will see two line same
error message in git output. I think it's not mecessary,
so suggerst not return error message to cli. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
It appears that there are several places that password length, complexity and ispwned
are not currently been checked when changing passwords. This PR adds these.
Fix#17977
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add setting to OAuth handlers to override local 2FA settings
This PR adds a setting to OAuth and OpenID login sources to allow the source to
override local 2FA requirements.
Fix#13939
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix regression from #16544
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add scopes settings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix trace logging in auth_openid
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add required claim options
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move UpdateExternalUser to externalaccount
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow OAuth2/OIDC to set Admin/Restricted status
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow use of the same group claim name for the prohibit login value
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup! Move UpdateExternalUser to externalaccount
* as per wxiaoguang
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add label back in
Signed-off-by: Andrew Thornton <art27@cantab.net>
* adjust localisation
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move keys to models/keys
* Rename models/keys -> models/asymkey
* change the missed package name
* Fix package alias
* Fix test
* Fix docs
* Fix test
* Fix test
* merge
* Some refactors related repository model
* Move more methods out of repository
* Move repository into models/repo
* Fix test
* Fix test
* some improvements
* Remove unnecessary function
* Improve install code to avoid low-level mistakes.
If a user tries to do a re-install in a Gitea database, they gets a warning and double check.
When Gitea runs, it never create empty app.ini automatically.
Also some small (related) refactoring:
* Refactor db.InitEngine related logic make it more clean (especially for the install code)
* Move some i18n strings out from setting.go to make the setting.go can be easily maintained.
* Show errors in CLI code if an incorrect app.ini is used.
* APP_DATA_PATH is created when installing, and checked when starting (no empty directory is created any more).
This PR registers requests with the process manager and manages hierarchy within the processes.
Git repos are then associated with a context, (usually the request's context) - with sub commands using this context as their base context.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove unnecessary functions of User struct
* Move more database methods out of user struct
* Move more database methods out of user struct
* Fix template failure
* Fix bug
* Remove finished FIXME
* remove unnecessary code
* Simplify Gothic to use our session store instead of creating a different store
We have been using xormstore to provide a separate session store for our OAuth2 logins
however, this relies on using gorilla context and some doubling of our session storing.
We can however, simplify and simply use our own chi-based session store. Thus removing
a cookie and some of the weirdness with missing contexts.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per review
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per review
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle MaxTokenLength
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Allow LDAP Sources to provide Avatars
Add setting to LDAP source to allow it to provide an Avatar.
Currently this is required to point to the image bytes.
Fix#4144
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rename as Avatar Attribute (drop JPEG)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always synchronize avatar if there is change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Actually get the avatar from the ldap
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean-up
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use len()>0 rather than != ""
Signed-off-by: Andrew Thornton <art27@cantab.net>
* slight shortcut in IsUploadAvatarChanged
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR extends #16594 to allow LDAP to be able to be set to skip local 2FA too. The technique used here would be extensible to PAM and SMTP sources.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Often when handling problems it is not clear which configuration file Gitea is
using. This PR simply ensures that the configuration file is emitted.
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adds a setting to OAuth and OpenID login sources to allow the source to
skip local 2FA authentication.
Fix#13939
Signed-off-by: Andrew Thornton <art27@cantab.net>
Although panics within the rendering pipeline are caught and dealt with,
panics that occur before that starts are unprotected and will kill Gitea
without being sent to the logs.
This PR adds a basic recovery handler to catch panics that occur after
the logger is initialised and ensure that they're sent to the logger.
Signed-off-by: Andrew Thornton <art27@cantab.net>
`models` does far too much. In particular it handles all `UserSignin`.
It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in.
Therefore we should move this code out of `models`.
This code has to depend on `models` - therefore it belongs in `services`.
There is a package in `services` called `auth` and clearly this functionality belongs in there.
Plan:
- [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication.
- [x] Move `models.UserSignIn` into `auth`
- [x] Move `models.ExternalUserLogin`
- [x] Move most of the `LoginVia*` methods to `auth` or subpackages
- [x] Move Resynchronize functionality to `auth`
- Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files.
- [x] Move the rest of the LDAP functionality in to the ldap subpackage
- [x] Re-factor the login sources to express an interfaces `auth.Source`?
- I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future
- [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable
- [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2
- [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models.
- [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2
- [x] More simplifications of login_source.go may need to be done
- Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178
- More refactors...?
- OpenID should probably become an auth Method but I think that can be left for another PR
- Methods should also probably be cleaned up - again another PR I think.
- SSPI still needs more refactors.* Rename auth.Auth auth.Method
* Restructure ssh_key.go
- move functions from models/user.go that relate to ssh_key to ssh_key
- split ssh_key.go to try create clearer function domains for allow for
future refactors here.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Retry rename on lock induced failures
Due to external locking on Windows it is possible for an
os.Rename to fail if the files or directories are being
used elsewhere.
This PR simply suggests retrying the rename again similar
to how we handle the os.Remove problems.
Fix#16427
Signed-off-by: Andrew Thornton <art27@cantab.net>
* resolve CI fail
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Second attempt at preventing zombies
* Ensure that the pipes are closed in ssh.go
* Ensure that a cancellable context is passed up in cmd/* http requests
* Make cmd.fail return properly so defers are obeyed
* Ensure that something is sent to stdout in case of blocks here
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint 2
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint 3
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Unfortunately go doesn't always ensure that execd processes are completely
waited for. On linux this means that zombie processes can occur.
This PR ensures that these are waited for by using signal notifier in serv and
passing a context elsewhere.
Signed-off-by: Andrew Thornton <art27@cantab.net>
One of the repeatedly reported issues has been that gitea produces too much console
logging during set up even if the console logger is turned off.
Fundamentally this is due to some otherwise very helpful logging that has to occur
before logging is set up. This has come to a head with the merging of #16243 where
otherwise potentially helpful Trace logging in the git module now appears on the
console.
This PR proposes three things:
1. Change the initial default logger to Info not Trace.
2. Change the logging for the AppPath things to Info in recompense.
3. Add two new command line options to gitea web: --quiet and --verbose
`gitea web -q` or `gitea web --quiet` will only log Fatal level initially.
`gitea web -verbose` will log at Trace.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* refactor routers directory
* move func used for web and api to common
* make corsHandler a function to prohibit side efects
* rm unused func
Co-authored-by: 6543 <6543@obermui.de>
* add a new internal hook to save ssh log
as title, when a ssh error ocure like #15785.
only when switch ``RUN_MODE`` to dev can we
found which error is ocure. But this way is
not a good idea for production envirment.
this changes try save ssh error mesage to the
log file like other log by a new internal hook.
I think it's usefull for find error message
in production envirment. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
* rename and fix nit
* Update modules/private/hook.go
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move restore repo to internal router and invoke from command to avoid open the same db file or queues files
* Follow @zeripath's review
* set no timeout for resotre repo private request
* make restore repo cancelable
Simplify the web.go FCGI path by moving the req.URL.Path fix-up to listener
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* _ to unused func options
* rm useless brakets
* rm trifial non used models functions
* rm dead code
* rm dead global vars
* fix routers/api/v1/repo/issue.go
* dont overload import module
* Implemented LFS client.
* Implemented scanning for pointer files.
* Implemented downloading of lfs files.
* Moved model-dependent code into services.
* Removed models dependency. Added TryReadPointerFromBuffer.
* Migrated code from service to module.
* Centralised storage creation.
* Removed dependency from models.
* Moved ContentStore into modules.
* Share structs between server and client.
* Moved method to services.
* Implemented lfs download on clone.
* Implemented LFS sync on clone and mirror update.
* Added form fields.
* Updated templates.
* Fixed condition.
* Use alternate endpoint.
* Added missing methods.
* Fixed typo and make linter happy.
* Detached pointer parser from gogit dependency.
* Fixed TestGetLFSRange test.
* Added context to support cancellation.
* Use ReadFull to probably read more data.
* Removed duplicated code from models.
* Moved scan implementation into pointer_scanner_nogogit.
* Changed method name.
* Added comments.
* Added more/specific log/error messages.
* Embedded lfs.Pointer into models.LFSMetaObject.
* Moved code from models to module.
* Moved code from models to module.
* Moved code from models to module.
* Reduced pointer usage.
* Embedded type.
* Use promoted fields.
* Fixed unexpected eof.
* Added unit tests.
* Implemented migration of local file paths.
* Show an error on invalid LFS endpoints.
* Hide settings if not used.
* Added LFS info to mirror struct.
* Fixed comment.
* Check LFS endpoint.
* Manage LFS settings from mirror page.
* Fixed selector.
* Adjusted selector.
* Added more tests.
* Added local filesystem migration test.
* Fixed typo.
* Reset settings.
* Added special windows path handling.
* Added unit test for HTTPClient.
* Added unit test for BasicTransferAdapter.
* Moved into util package.
* Test if LFS endpoint is allowed.
* Added support for git://
* Just use a static placeholder as the displayed url may be invalid.
* Reverted to original code.
* Added "Advanced Settings".
* Updated wording.
* Added discovery info link.
* Implemented suggestion.
* Fixed missing format parameter.
* Added Pointer.IsValid().
* Always remove model on error.
* Added suggestions.
* Use channel instead of array.
* Update routers/repo/migrate.go
* fmt
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Make SSH server host key path configurable
* make it possible to have multiple keys
* Make gitea.rsa the default key
* Add some more logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Exclude the current dump file from the dump
Always prevent the current file from being added to the dump.
Fix#13618
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add skip custom directory option
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Use [chi](https://github.com/go-chi/chi) instead of the forked [macaron](https://gitea.com/macaron/macaron). Since macaron and chi have conflicts with session share, this big PR becomes a have-to thing. According my previous idea, we can replace macaron step by step but I'm wrong. :( Below is a list of big changes on this PR.
- [x] Define `context.ResponseWriter` interface with an implementation `context.Response`.
- [x] Use chi instead of macaron, and also a customize `Route` to wrap chi so that the router usage is similar as before.
- [x] Create different routers for `web`, `api`, `internal` and `install` so that the codes will be more clear and no magic .
- [x] Use https://github.com/unrolled/render instead of macaron's internal render
- [x] Use https://github.com/NYTimes/gziphandler instead of https://gitea.com/macaron/gzip
- [x] Use https://gitea.com/go-chi/session which is a modified version of https://gitea.com/macaron/session and removed `nodb` support since it will not be maintained. **BREAK**
- [x] Use https://gitea.com/go-chi/captcha which is a modified version of https://gitea.com/macaron/captcha
- [x] Use https://gitea.com/go-chi/cache which is a modified version of https://gitea.com/macaron/cache
- [x] Use https://gitea.com/go-chi/binding which is a modified version of https://gitea.com/macaron/binding
- [x] Use https://github.com/go-chi/cors instead of https://gitea.com/macaron/cors
- [x] Dropped https://gitea.com/macaron/i18n and make a new one in `code.gitea.io/gitea/modules/translation`
- [x] Move validation form structs from `code.gitea.io/gitea/modules/auth` to `code.gitea.io/gitea/modules/forms` to avoid dependency cycle.
- [x] Removed macaron log service because it's not need any more. **BREAK**
- [x] All form structs have to be get by `web.GetForm(ctx)` in the route function but not as a function parameter on routes definition.
- [x] Move Git HTTP protocol implementation to use routers directly.
- [x] Fix the problem that chi routes don't support trailing slash but macaron did.
- [x] `/api/v1/swagger` now will be redirect to `/api/swagger` but not render directly so that `APIContext` will not create a html render.
Notices:
- Chi router don't support request with trailing slash
- Integration test `TestUserHeatmap` maybe mysql version related. It's failed on my macOS(mysql 5.7.29 installed via brew) but succeed on CI.
Co-authored-by: 6543 <6543@obermui.de>
* use certmagic for more extensible/robust ACME cert handling
* accept TOS based on config option
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* move SaltGeneration into HashPasswort and rename it to what it does
* Migration: Where Password is Valid with Empty String delete it
* prohibit empty password hash
* let SetPassword("") unset pwd stuff
* remove github.com/unknwon/com from models
* dont use "com.ToStr()"
* replace "com.ToStr" with "fmt.Sprint" where its easy to do
* more refactor
* fix test
* just "proxy" Copy func for now
* as per @lunny
* fix label of --id in admin delete user
This pr fixes the label descriptor of `gitea admin delete user`
but also adds a `--username` option.
Fix#13995
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix-spacing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add delete email support
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
`user.HashPassword` may potentially - and in fact now likely does - change
the `passwd_hash_algo` therefore whenever the `passwd` is updated, this
also needs to be updated.
Fix#13832
Thanks @fblaese for the hint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Refactor Logger
Refactor Logger to make a logger interface and make it possible to
wrap loggers for specific purposes.
* Refactor Doctor
Move the gitea doctor functions into its own module.
Use a logger for its messages instead of returning a results string[]
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/doctor/misc.go
Co-authored-by: 6543 <6543@obermui.de>
* Update modules/doctor/misc.go
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Use mount but not register for chi routes
* Fix test
* Fix test
* Fix test
* Fix comment
* turn back unnecessary change
* Remove the timout middleware since some operations may spend much time.
* Fix --port setting
Unfortunately there was an error in #13195 which set the --port
option before the settings were read. This PR fixes this by
moving applying this option to after the the settings are read
However, on looking further into this code I believe that the setPort
code was slightly odd.
Firstly, it may make sense to run the install page on a different
temporary port to the full system and this should be possible with
a --install-port option.
Secondy, if the --port option is provided we should apply it to both
otherwise there will be unusual behaviour on graceful restart
Thirdly, the documentation for --port says that the setting is
temporary - it should therefore not save its result to the configuration
(This however, does mean that authorized_keys and internal links may
not be correct. - I think we need to discuss this option further.)
Fix#13277
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update cmd/web.go
* Apply suggestions from code review
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add SendSync method
Usefull to have when you need to be confident that message was sent.
* Add sendmail command
* add checks that if either title or content is empty then error out
* Add a confirmation step
* Add --force option to bypass confirm step
* Move implementation of runSendMail to a different file
* Add copyrighting comment
* Make content optional
Print waring if it's empty or haven't been set up.
The warning will be skiped if there's a `--force` flag.
* Fix import style
Co-authored-by: 6543 <6543@obermui.de>
* Use batch when getting all users
IterateUsers uses batching by default.
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Send emails one by one instead of as one chunck
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Send messages concurantly
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Use SendAsync+Flush instead of SendSync
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Add timeout parameter to sendemail command
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Fix spelling mistake
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Update cmd/admin.go
Co-authored-by: 6543 <6543@obermui.de>
* Connect to a running Gitea instance
* Fix mispelling
* Add copyright comment
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix images in wiki edit preview (#11546)
Make sure wiki editor sets wiki to true so gitea renders it as a wiki page.
Also change the context data attr for edit form. This looks wrong but everywhere else in our code assumes the urlPrefix to be just the repo url when rendering and manually adds /wiki to the rendered url regardless.
Fixes#11540
* Avatar support minio
* Support repo avatar minio storage
* Add missing migration
* Fix bug
* Fix test
* Add test for minio store type on avatars and repo avatars; Add documents
* Fix bug
* Fix bug
* Add back missed avatar link method
* refactor codes
* Simplify the codes
* Code improvements
* Fix lint
* Fix test mysql
* Fix test mysql
* Fix test mysql
* Fix settings
* Fix test
* fix test
* Fix bug
* Provide self-registering storage system
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More simplification
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove old strings from setting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops attachments not attachment
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The gitea cmd/serv.go setup function deletes the console logger to
prevent stdout interference with commands. However, the problem is that
it then calls setting.NewContext which may cause an exit with log.Fatal
- which will then not be shown.
Now, log.Fatal is so disastrous that the interference that logging
causes is wanted. However, we can avoid stdout interference by emitting
on stderr.
This PR forces the creation of a console logger on stderr listening on
Fatal for these commands. Most commands have a `--debug` option now that
will print more reasons too - however, defaulting to give the log for
Fatal seems reasonable.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* LFS support to be stored on minio
* Fix test
* Fix lint
* Fix lint
* Fix check
* Fix test
* Update documents and add migration for LFS
* Fix some bugs
Provides new command: `gitea doctor recreate-table` which will recreate
db tables and copy the old data in to the new table.
This function can be used to remove the old warning of struct defaults being
out of date.
Fix#8868Fix#3265Fix#8894
Signed-off-by: Andrew Thornton <art27@cantab.net>
#12624 missed lowering the provided repoPath.
(Additionally make a few fixes to the way the debug flag works.)
Fix#12659Fix#12667
Signed-off-by: Andrew Thornton <art27@cantab.net>
