* Move to goldmark
Markdown rendering moved from blackfriday to the goldmark.
Multiple subtle changes required to the goldmark extensions to keep
current rendering and defaults.
Can go further with goldmark linkify and have this work within markdown
rendering making the link processor unnecessary.
Need to think about how to go about allowing extensions - at present it
seems that these would be hard to do without recompilation.
* linter fixes
Co-authored-by: Lauris BH <lauris@nix.lv>
* remove since it is there for 3years
* fix 500 error for ghost avatar
* dont insert "-1" in any case to issue.poster_id
* fix lint
* Test: ghost avatar link
* fix test
* Revert "remove since it is there for 3years"
This reverts commit fd9ad05159c84ba804b126d2a959963d82578b22.
* Revert "dont insert "-1" in any case to issue.poster_id"
This reverts commit 05469ab6d815a6cc6478a256018b9ed1a12749e0.
Co-authored-by: zeripath <art27@cantab.net>
* Handle if two or more attachments have the same name
* previously only the first could be downloaded - now each is downloadable
* dos also take care of #6506 (fix was: #6512)
* use func DownloadURL() at issue attatchments too
Instead of just adding test generated files to .gitignore prevent
them from being produced in the first place.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Push update after branch is restored
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Apply suggestions from code review
Use name from deletedBranch
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* make notifyWatchers work on multiple actions
* more efficient multiple notifyWatchers
* Make CommitRepoAction take advantage of multiple actions
* Batch post and pre-receive results
* Set batch to 30
* Auto adjust timeout & add logging
* adjust processing message
* Add some messages to pre-receive
* Make any non-200 status code from pre-receive an error
* Add missing hookPrintResults
* Remove shortcut for single action
* mistaken merge fix
* oops
* Move master branch to the front
* If repo was empty and the master branch is pushed ensure that that is set as the default branch
* fixup
* fixup
* Missed HookOptions in setdefaultbranch
* Batch PushUpdateAddTag and PushUpdateDelTag
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* fixed so when deleting a branch after merging a PR, a webhook is triggered
* changed to use pr.HeadRepo instead of ctx.Repo when sending webhook for a deletion of branch after merging pr
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Prefix all user-generated IDs in markup
* Add user-content- to IDs in unit-tests
* fixup markdown_test.go
* update the hrefs for the wiki test
* Add blackfriday extension regex
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* use numbers and not http.Status___ enum
* fix test
* add many missing swagger responses
* code format
* Deletion Sould return 204 ...
* error handling improvements
* if special error type ... then add it to swagger too
* one smal nit
* invalidTopicsError is []string
* valid swagger specification 2.0
- if you add responses swagger can tell you if you do it right 👍
* use ctx.InternalServerError
* Revert "use numbers and not http.Status___ enum"
This reverts commit b1ff386e2418ed6a7f183e756b13277d701278ef.
* use http.Status* enum everywhere
Change the repository referenced when displaying commits or diffs in
pull request to the base repository. The forked repository may not be
readable by users who can read the base repository. See discussion for
(#3356).
* Sleep longer if request speed is over github limitation
* improve code
* remove unused code
* fix lint
* Use github's rate limit remain value to determine how long to sleep
* Save reset time when finished github api request
* fix bug
* fix lint
* Add context.Context for sleep
* fix test
* improve code
* fix bug and lint
* fix import order
* update #9132 and #8834 - add SimpleMDE for issue and fix image paste for comment editor
* attache tribute to simplemde
* update #9197 force simplemde file input event when backspace press
* Adds functionality to change target branch of created pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use const instead of var in JavaScript additions
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Check if branches are equal and if PR already exists before changing target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Make sure to check all commits
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Print error messages for user as error flash message
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Disallow changing target branch of closed or merged pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Resolve conflicts after merge of upstream/master
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Change order of branch select fields
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes duplicate check
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use ctx.Tr for translations
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Recompile JS
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use correct translation namespace
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove redundant if condition
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves most change branch logic into pull service
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Completes comment
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Add Ref to ChangesPayload for logging changed target branches
instead of creating a new struct
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Revert changes to go.mod
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Directly use createComment method
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return 404 if pull request is not found. Move written check up
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove variable declaration
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return client errors on change pull request target errors
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return error in commit.HasPreviousCommit
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds blank line
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Test patch before persisting new target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update patch before testing (not working)
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes patch calls when changeing pull request target
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes unneeded check for base name
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves ChangeTargetBranch completely to pull service. Update patch status.
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Set webhook mode after errors were validated
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update PR in one transaction
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Move logic for check if head is equal with branch to pull model
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds missing comment and simplify return
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adjust CreateComment method call
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Change graceful to use a singleton obtained through GetManager instead of a global.
* Graceful: Make TestPullRequests shutdownable
* Graceful: Make the cron tasks graceful
* Graceful: AddTestPullRequest run in graceful ctx
* Graceful: SyncMirrors shutdown
* Graceful: SetDefaultContext for Xorm to be HammerContext
* Avoid starting graceful for migrate commands and checkout
* Graceful: DeliverHooks now can be shutdown
* Fix multiple syncing errors in modules/sync/UniqueQueue & Make UniqueQueue closable
* Begin the process of making the repo indexer shutdown gracefully
* Refactor
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add push-create to SSH serv
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Cannot push for another user unless admin
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Get owner in case admin pushes for another user
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Set new repo ID in result
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update to service and use new org perms
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Move pushCreateRepo to services
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Fix import order
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Changes for @guillep2k
* Check owner (not user) in SSH
* Add basic tests for created repos (private, not empty)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Make sure only issues are redirected to external tracker
* Ensure correct redirects for pulls after dependency or watch.
* NewIssuePost is always issues so no need to redirect with type.
* Save patches to temporary files
* Remove SavePatch and generate patches on the fly
* Use ioutil.TempDir
* fixup! Use ioutil.TempDir
* fixup! fixup! Use ioutil.TempDir
* RemoveAll LocalCopyPath() in initIntergrationTest
* Default to status checking on PR creation
* Remove unnecessary set to StatusChecking
* Protect against unable to load repo
* Handle conflicts
* Restore original conflict setting
* In TestPullRequests update status to StatusChecking before running TestPatch
* reject reactions wich ar not allowed
* dont duble check CreateReaction now throw ErrForbiddenIssueReaction
* add /repos/{owner}/{repo}/issues/comments/{id}/reactions endpoint
* add Find Functions
* fix some swagger stuff + add issue reaction endpoints + GET ReactionList now use FindReactions...
* explicite Issue Only Reaction for FindReactionsOptions with "-1" commentID
* load issue; load user ...
* return error again
* swagger def canged after LINT
* check if user has ben loaded
* add Tests
* better way of comparing results
* add suggestion
* use different issue for test
(dont interfear with integration test)
* test dont compare Location on timeCompare
* TEST: add forbidden dubble add
* add comments in code to explain
* add settings.UI.ReactionsMap
so if !setting.UI.ReactionsMap[opts.Type] works
* Possibility to not use whitelist but allow anyone with write access
* fix existing test
* rename migration function
* Try to give a better name for migration step
* Clear settings if higher level setting is not set
* Move official reviews to db instead of counting approvals each time
* migration
* fix
* fix migration
* fix migration
* Remove NOT NULL from EnableWhitelist as migration isn't possible
* Fix migration, reviews are connected to issues.
* Fix SQL query issues in GetReviewersByPullID.
* Simplify function GetReviewersByIssueID
* Handle reviewers that has been deleted
* Ensure reviews for test is in a well defined order
* Only clear and set official reviews when it is an approve or reject.
* Make repository list @ issues/PR page persist
Will partially fix#6355
* Enable multiple selections in repo list @ issues/PR page
Part of issue #6355
* Add RepoIDs to UserIssueStatsOptions to make "type" count correct when selecting one/multiple repos.
* Replace variable "repo" with list "repos[]" and enable multiple selections of repositories from list by including/excluding RepoIDs in list.
*
* Remove redundant code
* Add 'All' button
Improves functionality of the page, so that backtracking is not necessary to reset the page
* Remove redundant variable
Completely replace 'RepoID' with 'RepoIDs' and remove redundant code
* Add RepoIDs to label link
* Revert part of code to previous version to troubleshoot build failure
* Implement old and new pieces of code whilst adhering to multi select
* Attempt to join the two versions
Last commit passed tests but doesn't work in practice, this works in practice and hopefully passes the tests.
* Update tests to desired state
* Fix pagination implementation and tests
* Pass repoIDs as `repos=[1,2,3...]` instead of several `repos[]=..`
* Update tests file to reflect new functionality
* Update template with new `repos` format
* Implement new solution to show constant "total issues" count for "All" button
* Correct behavior when passing zero to array
* Comment out test url returning 404
This keeps returning 404 in the test despite working in practice, for the sake of running more tests I am commenting it out
* Comment out another test url returning 404
Last attempt, if more tests crash I will uncomment the urls and request assistance.
* Reenable tests and test fix
* Re-enable tests
* Make selecting "In your repositories" reset selection as passing IDs of repos belonging to other profiles causes breakage
* Remove unnecessary (with multi-selection enable) code
* Drop repo from repo map and total count if permission denied
* Remove extra parenthesis
* make template work again
* find bug!
* forgot the '#' at bugfixing
* delete unused RepoID
* compile regex only one time
* make fmt
* local variable = capital letter lower
* check if repos query pattern is correct
* pagination remove last , - make regex work again
* use Replace instead of ReplaceAll; del delete
* fix test
* how did this test binary got in?!?
dont forgot the "-p" at git add * !
* dont replace -> cut fisrt & last string
Co-Authored-By: zeripath <art27@cantab.net>
* jet another regex
dont mind as long as it has the same result and is performatn ...
Co-Authored-By: zeripath <art27@cantab.net>
* dont use nonexisting repo for test
* exclude /issues?type=created_by from test
* add table to querys
use same syntax in each query (table.colum)
* add new issue for test
* dont make a workaround or something else
this need a refactor itself and is out of scope for this PR
* fix misspell
* CI.redo()
* englisch txt update
Co-Authored-By: zeripath <art27@cantab.net>
* add sugestions
* Tweak & Fix
* CI.restart()
