Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes#27062Fixes#18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
This PR adds a section to the documentation that links to the project
[Opengist](https://github.com/thomiceli/opengist) on GitHub.
The feature was proposed in #16670 but didn't resonate well with the
maintainers.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
According to [Debian
docs](https://wiki.debian.org/DebianRepository/UseThirdParty):
> The certificate MUST NOT be placed in /etc/apt/trusted.gpg.d or loaded
by apt-key add.
> ...
> If future updates to the certificate will be managed by an apt/dpkg
package as recommended below, then it SHOULD be downloaded into
/usr/share/keyrings using the same filename that will be provided by the
package. If it will be managed locally , it SHOULD be downloaded into
/etc/apt/keyrings instead.
> ...
> A sources.list entry SHOULD have the signed-by option set.
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
Update more actions to use nodejs20 runtime and also update the docs for
checkout action usage.
similar to:
- #27836
- #27096
---------
Signed-off-by: Rui Chen <rui@chenrui.dev>
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
Several fields in the "Verify group membership in LDAP" docs were
confusingly titled when compared to the actual fields in the
application, this change rectifies that by matching the docs to the
fields already present in gitea.
Signed-off-by: David Hulick <dave.hulick@gmail.com>
Close#28287
## How to test it in local
convert Makefile L34 into:
```
cd .tmp/upstream-docs && git clean -f && git reset --hard && git fetch origin pull/28302/head:pr28302 && git switch pr28302
```
https://gitea.com/gitea/gitea-docusaurus/actions/runs/661/jobs/0#jobstep-9-39
I noticed that there are many warning logs in building docs.
It is causing 404 in docs.gitea.com now, so we need to fix it.
And there are also some other problems in v1.19 which can not be done in
this PR.
ps: Are there any good methods to test this in local?
The bug has been fixed for several months in the
`docker/build-push-action`
The fix commit is
[d8823bfaed](d8823bfaed)
as the Gitea Actions Doc mentioned too.
This patchset changes the connection string builder to use net.URL and
the host/port parser to use the stdlib function for splitting host from
port. It also adds a footnote about a potentially required portnumber
for postgres UNIX sockets.
Fixes: #24552
Closes#27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
Duplicate headers in a single Markdown document are problemlematic
because the auto-generated links won't be stable. Enable this rule with
no exceptions which is also the default of `markdownlint`. For example:
```md
# A
## Example
# B
## Example
```
Docasaurus will generated `example` and `example-1` links for this. If
the first heading is altered, the link `example` will unexpectedly move
to the second example heading.
Ref: https://github.com/go-gitea/gitea/pull/27461#discussion_r1347987659
Part of https://github.com/go-gitea/gitea/issues/27097:
- `gitea` theme is renamed to `gitea-light`
- `arc-green` theme is renamed to `gitea-dark`
- `auto` theme is renamed to `gitea-auto`
I put both themes in separate CSS files, removing all colors from the
base CSS. Existing users will be migrated to the new theme names. The
dark theme recolor will follow in a separate PR.
## ⚠️ BREAKING ⚠️
1. If there are existing custom themes with the names `gitea-light` or
`gitea-dark`, rename them before this upgrade and update the `theme`
column in the `user` table for each affected user.
2. The theme in `<html>` has moved from `class="theme-name"` to
`data-theme="name"`, existing customizations that depend on should be
updated.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
Previously, the production build never output sourcemaps. Now we emit
one file for `index.js` because it is the most likely one where we need
to be able to better debug reported issues like
https://github.com/go-gitea/gitea/issues/27213. This will currently
increase the binary size of gitea by around 700kB which is what the
gzipped source map file has.
Also, I fixed the CSS sourcemap generation which was broken since the
introduction of lightningcss.
WIP because:
- [x] Some calls set a `content-type` but send no body, can likely
remove the header
- [x] Need to check whether `charset=utf-8` has any significance on the
webauthn calls, I assume not as it is the default for json content.
- [x] Maybe `no-restricted-globals` is better for eslint, but will
require a lot of duplication in the yaml or moving eslint config to a
`.js` extension.
- [x] Maybe export `request` as `fetch`, shadowing the global.
Closes#26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Hello,
The current package guide for cargo gives you only the git index, with
the HTTP Index stabilized being used as default for crates.io and being
better for most use-cases.
However, it's not documented that gitea supports the sparse spec, and it
does not require the _crates-index git repo for the sparse api.
I personally think we should push users to use the sparse instead of the
git repository. (Even let users disable crates-index repos if they only
want to use sparse)
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.
And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.
1. Introduce lightweight `fetch` wrapper functions that automatically
sets csfr token, content-type and use it in `RepoActionView.vue`.
2. Fix a specific issue on `RepoActionView.vue` where a fetch network
error is shortly visible during page reload sometimes. It can be
reproduced by F5-in in quick succession on the actions view page and was
also producing a red error box on the page.
Once approved, we can replace all current `fetch` uses in UI with this
in another PR.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This feature was removed by #22219 to avoid possible CSRF attack.
This PR takes reverseproxy auth for API back but with default disabled.
To prevent possbile CSRF attack, the responsibility will be the
reverseproxy but not Gitea itself.
For those want to enable this `ENABLE_REVERSE_PROXY_AUTHENTICATION_API`,
they should know what they are doing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
This change was caused by #26271, for configuration as below:
```
[attachment]
ENABLE = true
PATH = data/attachments
MAX_SIZE = 100
MAX_FILES = 5
```
Before #26271, the resolved path is ${AppWorkPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/attachments`)
After #26271, the resolved path is ${AppDataPath}/${attachments.PATH}
(such as `/var/lib/gitea/data/data/attachments`)
Fix https://github.com/go-gitea/gitea/issues/26864
Follow https://github.com/go-gitea/gitea/pull/26271
copy and modified from #14572
> Whilst debating enforcing MFA within our team, I realised there isn't
a lot of context to the side effects of enabling it. Most of us use Git
over HTTP and would need to add a token.
I plan to add another PR that adds a sentence to the UI about needing to
generate a token when enabling MFA if HTTP is to be used.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
The xorm `Sync2` has already been deprecated in favor of `Sync`,
so let's do the same inside the Gitea codebase.
Command used to replace everything:
```sh
for i in $(ag Sync2 --files-with-matches); do vim $i -c ':%sno/Sync2/Sync/g' -c ':wq'; done
```
This PR adds our matrix space to the support options and alphabetizes
the list.
I also considered adding our Mastodon, however that isn't as suitable as
the other options because it's just whoever has access to the account vs
a community chat/forum.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
In the previous feature description, numerous functionalities of Gitea
were listed, which appeared redundant and failed to highlight the unique
characteristics of Gitea. Therefore, I have rewritten this section based
on the description provided on the official Gitea website
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.
Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.
The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.
Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
---------
Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
