* Refactor jwt.StandardClaims to RegisteredClaims
go-jwt/jwt has deprecated the StandardClaims interface to use RegisteredClaims
instead. This PR migrates to use this new format.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Make router logger more friendly, show the related function name/file/line.
[BREAKING]
This PR substantially changes the logging format of the router logger. If you use this logging for monitoring e.g. fail2ban you will need to update this to match the new format.
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
if return a error message to cli, it will print it
to stderr which is duplicate with our code (line 82
in same file). so user will see two line same
error message in git output. I think it's not mecessary,
so suggerst not return error message to cli. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
It appears that there are several places that password length, complexity and ispwned
are not currently been checked when changing passwords. This PR adds these.
Fix#17977
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add setting to OAuth handlers to override local 2FA settings
This PR adds a setting to OAuth and OpenID login sources to allow the source to
override local 2FA requirements.
Fix#13939
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix regression from #16544
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add scopes settings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix trace logging in auth_openid
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add required claim options
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move UpdateExternalUser to externalaccount
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow OAuth2/OIDC to set Admin/Restricted status
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow use of the same group claim name for the prohibit login value
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup! Move UpdateExternalUser to externalaccount
* as per wxiaoguang
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add label back in
Signed-off-by: Andrew Thornton <art27@cantab.net>
* adjust localisation
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move keys to models/keys
* Rename models/keys -> models/asymkey
* change the missed package name
* Fix package alias
* Fix test
* Fix docs
* Fix test
* Fix test
* merge
* Some refactors related repository model
* Move more methods out of repository
* Move repository into models/repo
* Fix test
* Fix test
* some improvements
* Remove unnecessary function
* Improve install code to avoid low-level mistakes.
If a user tries to do a re-install in a Gitea database, they gets a warning and double check.
When Gitea runs, it never create empty app.ini automatically.
Also some small (related) refactoring:
* Refactor db.InitEngine related logic make it more clean (especially for the install code)
* Move some i18n strings out from setting.go to make the setting.go can be easily maintained.
* Show errors in CLI code if an incorrect app.ini is used.
* APP_DATA_PATH is created when installing, and checked when starting (no empty directory is created any more).
This PR registers requests with the process manager and manages hierarchy within the processes.
Git repos are then associated with a context, (usually the request's context) - with sub commands using this context as their base context.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove unnecessary functions of User struct
* Move more database methods out of user struct
* Move more database methods out of user struct
* Fix template failure
* Fix bug
* Remove finished FIXME
* remove unnecessary code
* Simplify Gothic to use our session store instead of creating a different store
We have been using xormstore to provide a separate session store for our OAuth2 logins
however, this relies on using gorilla context and some doubling of our session storing.
We can however, simplify and simply use our own chi-based session store. Thus removing
a cookie and some of the weirdness with missing contexts.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per review
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per review
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle MaxTokenLength
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Allow LDAP Sources to provide Avatars
Add setting to LDAP source to allow it to provide an Avatar.
Currently this is required to point to the image bytes.
Fix#4144
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rename as Avatar Attribute (drop JPEG)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always synchronize avatar if there is change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Actually get the avatar from the ldap
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean-up
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use len()>0 rather than != ""
Signed-off-by: Andrew Thornton <art27@cantab.net>
* slight shortcut in IsUploadAvatarChanged
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR extends #16594 to allow LDAP to be able to be set to skip local 2FA too. The technique used here would be extensible to PAM and SMTP sources.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Often when handling problems it is not clear which configuration file Gitea is
using. This PR simply ensures that the configuration file is emitted.
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adds a setting to OAuth and OpenID login sources to allow the source to
skip local 2FA authentication.
Fix#13939
Signed-off-by: Andrew Thornton <art27@cantab.net>
Although panics within the rendering pipeline are caught and dealt with,
panics that occur before that starts are unprotected and will kill Gitea
without being sent to the logs.
This PR adds a basic recovery handler to catch panics that occur after
the logger is initialised and ensure that they're sent to the logger.
Signed-off-by: Andrew Thornton <art27@cantab.net>
`models` does far too much. In particular it handles all `UserSignin`.
It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in.
Therefore we should move this code out of `models`.
This code has to depend on `models` - therefore it belongs in `services`.
There is a package in `services` called `auth` and clearly this functionality belongs in there.
Plan:
- [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication.
- [x] Move `models.UserSignIn` into `auth`
- [x] Move `models.ExternalUserLogin`
- [x] Move most of the `LoginVia*` methods to `auth` or subpackages
- [x] Move Resynchronize functionality to `auth`
- Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files.
- [x] Move the rest of the LDAP functionality in to the ldap subpackage
- [x] Re-factor the login sources to express an interfaces `auth.Source`?
- I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future
- [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable
- [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2
- [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models.
- [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2
- [x] More simplifications of login_source.go may need to be done
- Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178
- More refactors...?
- OpenID should probably become an auth Method but I think that can be left for another PR
- Methods should also probably be cleaned up - again another PR I think.
- SSPI still needs more refactors.* Rename auth.Auth auth.Method
* Restructure ssh_key.go
- move functions from models/user.go that relate to ssh_key to ssh_key
- split ssh_key.go to try create clearer function domains for allow for
future refactors here.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Retry rename on lock induced failures
Due to external locking on Windows it is possible for an
os.Rename to fail if the files or directories are being
used elsewhere.
This PR simply suggests retrying the rename again similar
to how we handle the os.Remove problems.
Fix#16427
Signed-off-by: Andrew Thornton <art27@cantab.net>
* resolve CI fail
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Second attempt at preventing zombies
* Ensure that the pipes are closed in ssh.go
* Ensure that a cancellable context is passed up in cmd/* http requests
* Make cmd.fail return properly so defers are obeyed
* Ensure that something is sent to stdout in case of blocks here
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint 2
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint 3
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fixup
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Unfortunately go doesn't always ensure that execd processes are completely
waited for. On linux this means that zombie processes can occur.
This PR ensures that these are waited for by using signal notifier in serv and
passing a context elsewhere.
Signed-off-by: Andrew Thornton <art27@cantab.net>
One of the repeatedly reported issues has been that gitea produces too much console
logging during set up even if the console logger is turned off.
Fundamentally this is due to some otherwise very helpful logging that has to occur
before logging is set up. This has come to a head with the merging of #16243 where
otherwise potentially helpful Trace logging in the git module now appears on the
console.
This PR proposes three things:
1. Change the initial default logger to Info not Trace.
2. Change the logging for the AppPath things to Info in recompense.
3. Add two new command line options to gitea web: --quiet and --verbose
`gitea web -q` or `gitea web --quiet` will only log Fatal level initially.
`gitea web -verbose` will log at Trace.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* refactor routers directory
* move func used for web and api to common
* make corsHandler a function to prohibit side efects
* rm unused func
Co-authored-by: 6543 <6543@obermui.de>
* add a new internal hook to save ssh log
as title, when a ssh error ocure like #15785.
only when switch ``RUN_MODE`` to dev can we
found which error is ocure. But this way is
not a good idea for production envirment.
this changes try save ssh error mesage to the
log file like other log by a new internal hook.
I think it's usefull for find error message
in production envirment. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
* rename and fix nit
* Update modules/private/hook.go
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move restore repo to internal router and invoke from command to avoid open the same db file or queues files
* Follow @zeripath's review
* set no timeout for resotre repo private request
* make restore repo cancelable
Simplify the web.go FCGI path by moving the req.URL.Path fix-up to listener
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* _ to unused func options
* rm useless brakets
* rm trifial non used models functions
* rm dead code
* rm dead global vars
* fix routers/api/v1/repo/issue.go
* dont overload import module
* Implemented LFS client.
* Implemented scanning for pointer files.
* Implemented downloading of lfs files.
* Moved model-dependent code into services.
* Removed models dependency. Added TryReadPointerFromBuffer.
* Migrated code from service to module.
* Centralised storage creation.
* Removed dependency from models.
* Moved ContentStore into modules.
* Share structs between server and client.
* Moved method to services.
* Implemented lfs download on clone.
* Implemented LFS sync on clone and mirror update.
* Added form fields.
* Updated templates.
* Fixed condition.
* Use alternate endpoint.
* Added missing methods.
* Fixed typo and make linter happy.
* Detached pointer parser from gogit dependency.
* Fixed TestGetLFSRange test.
* Added context to support cancellation.
* Use ReadFull to probably read more data.
* Removed duplicated code from models.
* Moved scan implementation into pointer_scanner_nogogit.
* Changed method name.
* Added comments.
* Added more/specific log/error messages.
* Embedded lfs.Pointer into models.LFSMetaObject.
* Moved code from models to module.
* Moved code from models to module.
* Moved code from models to module.
* Reduced pointer usage.
* Embedded type.
* Use promoted fields.
* Fixed unexpected eof.
* Added unit tests.
* Implemented migration of local file paths.
* Show an error on invalid LFS endpoints.
* Hide settings if not used.
* Added LFS info to mirror struct.
* Fixed comment.
* Check LFS endpoint.
* Manage LFS settings from mirror page.
* Fixed selector.
* Adjusted selector.
* Added more tests.
* Added local filesystem migration test.
* Fixed typo.
* Reset settings.
* Added special windows path handling.
* Added unit test for HTTPClient.
* Added unit test for BasicTransferAdapter.
* Moved into util package.
* Test if LFS endpoint is allowed.
* Added support for git://
* Just use a static placeholder as the displayed url may be invalid.
* Reverted to original code.
* Added "Advanced Settings".
* Updated wording.
* Added discovery info link.
* Implemented suggestion.
* Fixed missing format parameter.
* Added Pointer.IsValid().
* Always remove model on error.
* Added suggestions.
* Use channel instead of array.
* Update routers/repo/migrate.go
* fmt
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Make SSH server host key path configurable
* make it possible to have multiple keys
* Make gitea.rsa the default key
* Add some more logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Exclude the current dump file from the dump
Always prevent the current file from being added to the dump.
Fix#13618
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add skip custom directory option
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Use [chi](https://github.com/go-chi/chi) instead of the forked [macaron](https://gitea.com/macaron/macaron). Since macaron and chi have conflicts with session share, this big PR becomes a have-to thing. According my previous idea, we can replace macaron step by step but I'm wrong. :( Below is a list of big changes on this PR.
- [x] Define `context.ResponseWriter` interface with an implementation `context.Response`.
- [x] Use chi instead of macaron, and also a customize `Route` to wrap chi so that the router usage is similar as before.
- [x] Create different routers for `web`, `api`, `internal` and `install` so that the codes will be more clear and no magic .
- [x] Use https://github.com/unrolled/render instead of macaron's internal render
- [x] Use https://github.com/NYTimes/gziphandler instead of https://gitea.com/macaron/gzip
- [x] Use https://gitea.com/go-chi/session which is a modified version of https://gitea.com/macaron/session and removed `nodb` support since it will not be maintained. **BREAK**
- [x] Use https://gitea.com/go-chi/captcha which is a modified version of https://gitea.com/macaron/captcha
- [x] Use https://gitea.com/go-chi/cache which is a modified version of https://gitea.com/macaron/cache
- [x] Use https://gitea.com/go-chi/binding which is a modified version of https://gitea.com/macaron/binding
- [x] Use https://github.com/go-chi/cors instead of https://gitea.com/macaron/cors
- [x] Dropped https://gitea.com/macaron/i18n and make a new one in `code.gitea.io/gitea/modules/translation`
- [x] Move validation form structs from `code.gitea.io/gitea/modules/auth` to `code.gitea.io/gitea/modules/forms` to avoid dependency cycle.
- [x] Removed macaron log service because it's not need any more. **BREAK**
- [x] All form structs have to be get by `web.GetForm(ctx)` in the route function but not as a function parameter on routes definition.
- [x] Move Git HTTP protocol implementation to use routers directly.
- [x] Fix the problem that chi routes don't support trailing slash but macaron did.
- [x] `/api/v1/swagger` now will be redirect to `/api/swagger` but not render directly so that `APIContext` will not create a html render.
Notices:
- Chi router don't support request with trailing slash
- Integration test `TestUserHeatmap` maybe mysql version related. It's failed on my macOS(mysql 5.7.29 installed via brew) but succeed on CI.
Co-authored-by: 6543 <6543@obermui.de>
* use certmagic for more extensible/robust ACME cert handling
* accept TOS based on config option
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* move SaltGeneration into HashPasswort and rename it to what it does
* Migration: Where Password is Valid with Empty String delete it
* prohibit empty password hash
* let SetPassword("") unset pwd stuff
* remove github.com/unknwon/com from models
* dont use "com.ToStr()"
* replace "com.ToStr" with "fmt.Sprint" where its easy to do
* more refactor
* fix test
* just "proxy" Copy func for now
* as per @lunny
* fix label of --id in admin delete user
This pr fixes the label descriptor of `gitea admin delete user`
but also adds a `--username` option.
Fix#13995
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix-spacing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add delete email support
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
`user.HashPassword` may potentially - and in fact now likely does - change
the `passwd_hash_algo` therefore whenever the `passwd` is updated, this
also needs to be updated.
Fix#13832
Thanks @fblaese for the hint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Refactor Logger
Refactor Logger to make a logger interface and make it possible to
wrap loggers for specific purposes.
* Refactor Doctor
Move the gitea doctor functions into its own module.
Use a logger for its messages instead of returning a results string[]
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/doctor/misc.go
Co-authored-by: 6543 <6543@obermui.de>
* Update modules/doctor/misc.go
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Use mount but not register for chi routes
* Fix test
* Fix test
* Fix test
* Fix comment
* turn back unnecessary change
* Remove the timout middleware since some operations may spend much time.
* Fix --port setting
Unfortunately there was an error in #13195 which set the --port
option before the settings were read. This PR fixes this by
moving applying this option to after the the settings are read
However, on looking further into this code I believe that the setPort
code was slightly odd.
Firstly, it may make sense to run the install page on a different
temporary port to the full system and this should be possible with
a --install-port option.
Secondy, if the --port option is provided we should apply it to both
otherwise there will be unusual behaviour on graceful restart
Thirdly, the documentation for --port says that the setting is
temporary - it should therefore not save its result to the configuration
(This however, does mean that authorized_keys and internal links may
not be correct. - I think we need to discuss this option further.)
Fix#13277
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update cmd/web.go
* Apply suggestions from code review
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add SendSync method
Usefull to have when you need to be confident that message was sent.
* Add sendmail command
* add checks that if either title or content is empty then error out
* Add a confirmation step
* Add --force option to bypass confirm step
* Move implementation of runSendMail to a different file
* Add copyrighting comment
* Make content optional
Print waring if it's empty or haven't been set up.
The warning will be skiped if there's a `--force` flag.
* Fix import style
Co-authored-by: 6543 <6543@obermui.de>
* Use batch when getting all users
IterateUsers uses batching by default.
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Send emails one by one instead of as one chunck
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Send messages concurantly
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Use SendAsync+Flush instead of SendSync
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Add timeout parameter to sendemail command
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Fix spelling mistake
Signed-off-by: Maxim Zhiburt <zhiburt@gmail.com>
* Update cmd/admin.go
Co-authored-by: 6543 <6543@obermui.de>
* Connect to a running Gitea instance
* Fix mispelling
* Add copyright comment
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix images in wiki edit preview (#11546)
Make sure wiki editor sets wiki to true so gitea renders it as a wiki page.
Also change the context data attr for edit form. This looks wrong but everywhere else in our code assumes the urlPrefix to be just the repo url when rendering and manually adds /wiki to the rendered url regardless.
Fixes#11540
* Avatar support minio
* Support repo avatar minio storage
* Add missing migration
* Fix bug
* Fix test
* Add test for minio store type on avatars and repo avatars; Add documents
* Fix bug
* Fix bug
* Add back missed avatar link method
* refactor codes
* Simplify the codes
* Code improvements
* Fix lint
* Fix test mysql
* Fix test mysql
* Fix test mysql
* Fix settings
* Fix test
* fix test
* Fix bug
* Provide self-registering storage system
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More simplification
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove old strings from setting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* oops attachments not attachment
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The gitea cmd/serv.go setup function deletes the console logger to
prevent stdout interference with commands. However, the problem is that
it then calls setting.NewContext which may cause an exit with log.Fatal
- which will then not be shown.
Now, log.Fatal is so disastrous that the interference that logging
causes is wanted. However, we can avoid stdout interference by emitting
on stderr.
This PR forces the creation of a console logger on stderr listening on
Fatal for these commands. Most commands have a `--debug` option now that
will print more reasons too - however, defaulting to give the log for
Fatal seems reasonable.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* LFS support to be stored on minio
* Fix test
* Fix lint
* Fix lint
* Fix check
* Fix test
* Update documents and add migration for LFS
* Fix some bugs
Provides new command: `gitea doctor recreate-table` which will recreate
db tables and copy the old data in to the new table.
This function can be used to remove the old warning of struct defaults being
out of date.
Fix#8868Fix#3265Fix#8894
Signed-off-by: Andrew Thornton <art27@cantab.net>
#12624 missed lowering the provided repoPath.
(Additionally make a few fixes to the way the debug flag works.)
Fix#12659Fix#12667
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
#12391 offered to change the default PID file from /var/run/gitea.pid however in discussion it was decided that this could break users of older systems. An alternative was offered that we could make the PID file compile/link time settable.
This PR does this, and changes the name of the setting from CustomPID to simply PIDFile. It also updates the from-source docs to show how to change the compiler settings to do this.
Closes#12391
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Florian Klink <flokli@flokli.de>
Replace all calls to os.Remove/os.RemoveAll by retrying util.Remove/util.RemoveAll and remove circular dependencies from util.
Fix#12339
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
* Make LogDescriptions race safe
* Add manager commands for pausing, resuming, adding and removing loggers
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Placate lint
* Ensure that file logger is run!
* Add support for smtp and conn
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add release-and-reopen
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add migration to set IsArchived false if it is null
Fix#11824
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add doctor
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Dump: Use mholt/archive/v3 to support tar including many compressions
Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>
* Dump: Allow dump output to stdout
Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>
* Dump: Fixed bug present since #6677 where SessionConfig.Provider is never "file"
Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>
* Dump: never pack RepoRootPath, LFS.ContentPath and LogRootPath when they are below AppDataPath
Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>
* Dump: also dump LFS (fixes#10058)
Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>
* Dump: never dump CustomPath if CustomPath is a subdir of or equal to AppDataPath (fixes#10365)
Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>
* Use log.Info instead of fmt.Fprintf
Signed-off-by: Philipp Homann <homann.philipp@googlemail.com>
* import ordering
* make fmt
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Matti R <matti@mdranta.net>
needed to fix issue as described in #10280
* rename check-db to check-db-version
* add check-db-consistency:
* find issues without existing repository
* find pulls without existing issues
* find tracked times without existing issues/pulls
* find labels without repository or org reference
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
InternalTokens are fixed as alphanum strings therefore TrimSpace from these.
Also use isatty to not add a terminal newline when redirecting generate.
Fix#11498
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
There is a potential memory leak in `Workerpool` due to the intricacies of
`time.Timer` stopping.
Whenever a `time.Timer` is `Stop`ped its channel must be cleared using a
`select` if the result of the `Stop()` is `false`.
Unfortunately in `Workerpool` these were checked the wrong way round.
However, there were a few other places that were not being checked.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This is a boolean flag; simply checking if it's set isn't enough, we must check the value as well.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Not all dumps need to include the logs, in a similar vain to not all dumps
needing to include repositories; these may be subject to different backup
mechanisms/constraints. Add a simple option to let them be excluded from the
dump to simplify workflows that need to exclude them or not collect in the
first place.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
* Add `gitea doctor --list` flag to list the checks that will be run, including those by default
* Add `gitea doctor --run` to run specific checks
* Add `gitea doctor --all` to run all checks
* Add db version checker
* Add non-default recalculate merge bases check/fixer to doctor
* Add hook checker (Fix#9878) and ensure hooks are executable (Fix#6319)
* Fix authorized_keys checker - slight change of functionality here because parsing the command is fragile and we should just check if the authorized_keys file is essentially the same as what gitea would produce. (This is still not perfect as order matters - we should probably just md5sum the two files.)
* Add SCRIPT_TYPE check (Fix#10977)
* Add `gitea doctor --fix` to attempt to fix what is possible to easily fix
* Add `gitea doctor --log-file` to set the log-file, be it a file, stdout or to switch off completely. (Fixes previously undetected bug with certain xorm logging configurations - see @6543 comment.)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* make admin auth list formatting configurable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @guillep2k
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add more logging in the LFS server
Adds more logging in the LFS server and stops sending internal server
error information to the client
* Add LFS Lock cursor implementation
* Simplify Claims in LFS and remove the float64 casts
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add doctor check of app.ini paths
* Make /custom dir not mandatory
* Fix message and improve interface
* Update cmd/doctor.go
Co-Authored-By: John Olheiser <42128690+jolheiser@users.noreply.github.com>
* Apaise lint
* Isn't the linter a sweet? (1)
* Isn't the linter a sweet? (2)
* Isn't the linter a sweet?? (3)
* Restart CI
Co-authored-by: John Olheiser <42128690+jolheiser@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
* Make WorkerPools and Queues flushable
Adds Flush methods to Queues and the WorkerPool
Further abstracts the WorkerPool
Adds a final step to Flush the queues in the defer from PrintCurrentTest
Fixes an issue with Settings inheritance in queues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Change to for loop
* Add IsEmpty and begin just making the queues composed WorkerPools
* subsume workerpool into the queues and create a flushable interface
* Add manager command
* Move flushall to queue.Manager and add to testlogger
* As per @guillep2k
* as per @guillep2k
* Just make queues all implement flushable and clean up the wrapped queue flushes
* cope with no timeout
Co-authored-by: Lauris BH <lauris@nix.lv>
* Delay printing hook statuses until after 1 second
* Move to a 5s delay, wrapped writer structure and add config
* Update cmd/hook.go
* Apply suggestions from code review
* Update cmd/hook.go
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* add doctor
* Add a new command doctor to check if some wrong configurations on gitea instance
* fix import
* use regex match authorized_keys on doctor
* Add documentation
#8982 attempted to enforce the gitea environment for pushes - unfortunately it tested the settings before they were actually read in - and therefore does not do that!
* make notifyWatchers work on multiple actions
* more efficient multiple notifyWatchers
* Make CommitRepoAction take advantage of multiple actions
* Batch post and pre-receive results
* Set batch to 30
* Auto adjust timeout & add logging
* adjust processing message
* Add some messages to pre-receive
* Make any non-200 status code from pre-receive an error
* Add missing hookPrintResults
* Remove shortcut for single action
* mistaken merge fix
* oops
* Move master branch to the front
* If repo was empty and the master branch is pushed ensure that that is set as the default branch
* fixup
* fixup
* Missed HookOptions in setdefaultbranch
* Batch PushUpdateAddTag and PushUpdateDelTag
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fixed errors logging in dump.go
* Replaced overlooked log.Fatal() with fatal()
* Run make fmt on dump.go
* Added missing new line to the fatal log
* Run make fmt on dump.go
* Change graceful to use a singleton obtained through GetManager instead of a global.
* Graceful: Make TestPullRequests shutdownable
* Graceful: Make the cron tasks graceful
* Graceful: AddTestPullRequest run in graceful ctx
* Graceful: SyncMirrors shutdown
* Graceful: SetDefaultContext for Xorm to be HammerContext
* Avoid starting graceful for migrate commands and checkout
* Graceful: DeliverHooks now can be shutdown
* Fix multiple syncing errors in modules/sync/UniqueQueue & Make UniqueQueue closable
* Begin the process of making the repo indexer shutdown gracefully
* Graceful: Create callbacks to with contexts
* Graceful: Say when Gitea is completely finished
* Graceful: Git and Process within HammerTime
Force all git commands to terminate at HammerTime
Force all process commands to terminate at HammerTime
Move almost all git processes to run as git Commands
* Graceful: Always Hammer after Shutdown
* ProcessManager: Add cancel functionality
* Fix tests
* Make sure that process.Manager.Kill() cancels
* Make threadsafe access to Processes and remove own unused Kill
* Remove cmd from the process manager as it is no longer used
* the default context is the correct context
* get rid of double till
* Graceful: Allow graceful restart for fcgi
My previous interpretation was incorrect - we do not handle sockets
being passed in over stdin
* Update web.go
* Graceful Shutdown for windows and others
Restructures modules/graceful, adding shutdown for windows, removing and
replacing the old minwinsvc code.
Creates a new waitGroup - terminate which allows for goroutines to
finish up after the shutdown of the servers.
Shutdown and terminate hooks are added for goroutines.
* Remove unused functions - these can be added in a different PR
* Add startup timeout functionality
* Document STARTUP_TIMEOUT
In investigating #7947 it has become clear that the storage component of go-git repositories needs closing.
This PR adds this Close function and adds the Close functions as necessary.
In TransferOwnership the ctx.Repo.GitRepo is closed if it is open to help prevent the risk of multiple open files.
Fixes#7947
* Only attempt to kill parent once
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add waitgroup for running servers
Add an option to protected branches to add writing deploy keys to the whitelist for pushing.
Please note this is technically a breaking change: previously if the owner of a repository was on the whitelist then any writing deploy key was effectively on the whitelist. This option will now need to be set if that is desired.
Closes#8472
Details:
* Allow Protected Branches to Whitelist Deploy Keys
* Add migration
* Ensure that IsDeployKey is set to false on the http pushes
* add not null default false
* Prevent deadlock in indexer initialisation during graceful restart
* Move from gracehttp to our own service to add graceful ssh
* Add timeout for start of indexers and make hammer time configurable
* Fix issue with re-initialization in indexer during tests
* move the code to detect use of closed to graceful
* Handle logs gracefully - add a pid suffix just before restart
* Move to using a cond and a holder for indexers
* use time.Since
* Add some comments and attribution
* update modules.txt
* Use zero to disable timeout
* Move RestartProcess to its own file
* Add cleanup routine
Add password complexity checks. The default settings require a lowercase, uppercase, number and a special character within passwords.
Co-Authored-By: T-M-A <maxim.tkachenko@gmail.com>
Co-Authored-By: Lanre Adelowo <adelowomailbox@gmail.com>
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-Authored-By: Lauris BH <lauris@nix.lv>
Regression in 356854fc5f, where
a log.Fatal call was removed. log.Fatal calls os.Exit(1) as intended,
but without it the fail() function returns normally and execution
continues past the fatal error, causing a panic.
This is visible as a go panic log and stack trace returned to the SSH
client, which is not only ugly, it leaks server and build system
information.
Fix by removing the stray return statement so that the fail() function
always calls os.Exit(1).
Fixes: https://github.com/go-gitea/gitea/issues/7457
Signed-off-by: Allen Wild <allenwild93@gmail.com>
* Fix#6946 by checking PullRequest ID on pushing
* Ensure we have the owner name, the pr attributes and the the issue
* Fix TestSearchRepo by waiting till indexing is done
* Update integrations/repo_search_test.go
* changes as per @mrsdizzie
* missing comma
* Spelling mistake
* Fix full pushing environment
* add CLI commands to manage LDAP authentication source
* delete Gogs copyright
* remove unused return value of func parseLoginSource
* fix comment
Co-Authored-By: ngourdon <31291059+ngourdon@users.noreply.github.com>
* remove config flag already present in global flags
* remove config flag from ldap commands in docs
* remove config flag handling
* Move hook functionality internally
* Internalise serv logic
* Remove old internal paths
* finally remove the gitlogger
* Disallow push on archived repositories
* fix lint error
* Update modules/private/key.go
* Update routers/private/hook.go
* Update routers/private/hook.go
* Update routers/private/hook.go
* Updated routers/private/serv.go
* Fix LFS Locks over SSH
* rev-list needs to be run by the hook process
* fixup
* Improve git test
* Ensure that the lfs files are created with a different prefix
* Reduce the replication in git_test.go
* slight refactor
* Remove unnecessary "/"
* Restore ensureAnonymousClone
* Restore ensureAnonymousClone
* Run rev-list on server side
* Try passing in the alternative directories instead
* Mark test as skipped
* Improve git test
* Ensure that the lfs files are created with a different prefix
* Reduce the replication in git_test.go
* Remove unnecessary "/"
When replicating to gitea from a remote system which makes use of
git refs to store extra data (for example, gerrit), pushing a lot
of refs to gitea can cause problems due to the extra processing
that the pre and post receive hooks perform. But it's still
useful for gitea to be able to serve those refs. This change
skips unecessary processing of refs other than branches or tags.
We don't need to check any ref that isn't a branch for branch
protection (protection will never be enabled). So in the
pre-receive hook, we wrap that check in a test for whether the
ref is a branch.
We also don't need to add information to the activity stream about
pushes to non-standard refs, so we skip that step in the
post-receive hook for refs which are not branches or tags.
For some concrete examples, gerrit maintains a ref for every
patchset of every change in the form refs/changes/XX/YYYY/Z.
Many systems use refs/notes to store additonal data about commits.
This change allows these and other schemes to be used without
affecting gitea.
* Add username flag in create-user command
* Fix the error message
* Change name to username on flag of create-user command
* Include create-user flags of both versions
* delete deprecated example of create-user command
When running the dump command, include the specific configuration file
provided as part of the backup. Currently we only zip up custom/ and this
misses the config file if it is somewhere else, like /etc/gitea/app.ini
Fixes#6034
* Panic don't fatal on create new logger
Fixes#5854
Signed-off-by: Andrew Thornton <art27@cantab.net>
* partial broken
* Update the logging infrastrcture
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reset the skip levels for Fatal and Error
Signed-off-by: Andrew Thornton <art27@cantab.net>
* broken ncsa
* More log.Error fixes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove nal
* set log-levels to lowercase
* Make console_test test all levels
* switch to lowercased levels
* OK now working
* Fix vetting issues
* Fix lint
* Fix tests
* change default logging to match current gitea
* Improve log testing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* reset error skip levels to 0
* Update documentation and access logger configuration
* Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE
* Fix broken level caching
* Refactor the router log
* Add Router logger
* Add colorizing options
* Adjust router colors
* Only create logger if they will be used
* update app.ini.sample
* rename Attribute ColorAttribute
* Change from white to green for function
* Set fatal/error levels
* Restore initial trace logger
* Fix Trace arguments in modules/auth/auth.go
* Properly handle XORMLogger
* Improve admin/config page
* fix fmt
* Add auto-compression of old logs
* Update error log levels
* Remove the unnecessary skip argument from Error, Fatal and Critical
* Add stacktrace support
* Fix tests
* Remove x/sync from vendors?
* Add stderr option to console logger
* Use filepath.ToSlash to protect against Windows in tests
* Remove prefixed underscores from names in colors.go
* Remove not implemented database logger
This was removed from Gogs on 4 Mar 2016 but left in the configuration
since then.
* Ensure that log paths are relative to ROOT_PATH
* use path.Join
* rename jsonConfig to logConfig
* Rename "config" to "jsonConfig" to make it clearer
* Requested changes
* Requested changes: XormLogger
* Try to color the windows terminal
If successful default to colorizing the console logs
* fixup
* Colorize initially too
* update vendor
* Colorize logs on default and remove if this is not a colorizing logger
* Fix documentation
* fix test
* Use go-isatty to detect if on windows we are on msys or cygwin
* Fix spelling mistake
* Add missing vendors
* More changes
* Rationalise the ANSI writer protection
* Adjust colors on advice from @0x5c
* Make Flags a comma separated list
* Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING
* Ensure matching is done on the non-colored message - to simpify EXPRESSION
* Use PathUnescape instead of QueryUnescape when working with branch names
Currently branch names with a '+' fail in certain situations because
QueryUnescape replaces the + character with a blank space.
Using PathUnescape should be better since it is defined as:
// PathUnescape is identical to QueryUnescape except that it does not
// unescape '+' to ' ' (space).
Fixes#6333
* Change error to match new function name
* Add new util function PathEscapeSegments
This function simply runs PathEscape on each segment of a path without
touching the forward slash itself. We want to use this instead of
PathEscape/QueryEscape in most cases because a forward slash is a valid name for a
branch etc... and we don't want that escaped in a URL.
Putting this in new file url.go and also moving a couple similar
functions into that file as well.
* Use EscapePathSegments where appropriate
Replace various uses of EscapePath/EscapeQuery with new
EscapePathSegments. Also remove uncessary uses of various
escape/unescape functions when the text had already been escaped or was
not escaped.
* Reformat comment to make drone build happy
* Remove no longer used url library
* Requested code changes
1. A key can either be an ssh user key or a deploy key. It cannot be both.
2. If a key is a user key - it can only be associated with one user.
3. If a key is a deploy key - it can be used in multiple repositories and the permissions it has on those repositories can be different.
4. If a repository is deleted, its deploy keys must be deleted too.
We currently don't enforce any of this and multiple repositories access with different permissions doesn't work at all. This PR enforces the following constraints:
- [x] You should not be able to add the same user key as another user
- [x] You should not be able to add a ssh user key which is being used as a deploy key
- [x] You should not be able to add a ssh deploy key which is being used as a user key
- [x] If you add an ssh deploy key to another repository you should be able to use it in different modes without losing the ability to use it in the other mode.
- [x] If you delete a repository you must delete all its deploy keys.
Fix#1357
The gitea prerecieve and postrecieve hooks and the gitea PushUpdate function require that the PusherID and PusherName are real users. Previously, these environment variables were not being set when using a deploy key - the main result being that pushing to empty repositories meant that is_empty status was not changed.
I've also added an integration test to ensure that the is_empty status is updated on pushing with a deploy key.
There is a slight issue in that the deploy key is now considered a proxy for the owner - we don't have a way of separating out the deploy key from the owner at present. This can be fixed in another PR.
Fix#3795
Signed-off-by: Andrew Thornton art27@cantab.net
By default, if `setting.NewContext()` prints out any warning logs, these are printed to the stdout breaking `git receive-pack` etc. meaning that even if there is a warning because of a minor problem in your app.ini but gitea starts despite this - you **CANNOT** push or pull over SSH.
This PR disables the console logger whilst in `serv.go`
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add util method and tests
* make sure the title of an issue cannot be empty
* wiki title cannot be empty
* pull request title cannot be empty
* update to make use of the new util methof
* add migration and basic UI for changing a user's theme
* update user themem
* use right text on button
* load theme based on users' selection
* load theme based on users' selection in pwa too
* update sample config
* delete older theme loading
* implement AfterLoad to set users' theme properly
* set up default theme when creating a user. This uses the installation wide theme
* use flash messages for error
* set default theme when creating a user from the cli
* fix @lunny review
